Kenne Bell 2200 Questions

BowTie Eater 5 Liter · 01-29-2002, 03:38 PM

Could I run the 2200 on a stock motor, with the boost set at the lowest amount without hurting the blower?

I want to push 400rwhp one day, and would like to use the Kenne Bell 2200 blower, but i want to purchase the blower, use it on the (almost) stock motor and add stuff to it later.

Anyone have any ideas???

Thanks

NoSlow5.0 · 01-29-2002, 03:53 PM

Yes. Most base super charger kits are designed for stock motors. They come with the upgrades you need which are usualy a new intake pump, or an inline booster, and an FMU. Get a larger MAF, larger injectors, a fuel preasure reg, and an ignition and you can run more boost than the base kit comes with. You might want to get a new in-tank pump if it does not come with one. Exhaust and a larger t-body would be good to, but not necessary. Down the road you might want a chip too. Later

Light Em Up!!!

BowTie Eater 5 Liter · 01-29-2002, 08:45 PM

well, the 2200 is the bigger blower, the base is the 1500. would it still work though?

01-29-2002, 03:38 PM	#1
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	Kenne Bell 2200 Questions Could I run the 2200 on a stock motor, with the boost set at the lowest amount without hurting the blower? I want to push 400rwhp one day, and would like to use the Kenne Bell 2200 blower, but i want to purchase the blower, use it on the (almost) stock motor and add stuff to it later. Anyone have any ideas??? Thanks __________________ 1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1 88 GT Best 60ft. 2.181 Best ET 14.350 Best MPH 98.01 ~WRECKED!!!!~

01-29-2002, 03:53 PM	#2
NoSlow5.0 YOU HAVE NO MARBLES!!!!!! Join Date: Aug 2000 Location: Jonesboro,Georgia,USA (Providence, Ri) Posts: 868	Yes. Most base super charger kits are designed for stock motors. They come with the upgrades you need which are usualy a new intake pump, or an inline booster, and an FMU. Get a larger MAF, larger injectors, a fuel preasure reg, and an ignition and you can run more boost than the base kit comes with. You might want to get a new in-tank pump if it does not come with one. Exhaust and a larger t-body would be good to, but not necessary. Down the road you might want a chip too. Later Light Em Up!!! __________________ My 87 GT....Marbles....The one and only O.G.!!! AIM: Marbles87Fox Light Em Up!!!

01-29-2002, 08:45 PM	#3
BowTie Eater 5 Liter Registered Member Join Date: Nov 2000 Location: Maple Ridge B.C. Canada, The Best Place In The World Posts: 871	well, the 2200 is the bigger blower, the base is the 1500. would it still work though? __________________ 1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1 88 GT Best 60ft. 2.181 Best ET 14.350 Best MPH 98.01 ~WRECKED!!!!~

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kenne Bell Supercharger?	5.0 Pony	Windsor Power	9	09-13-2010 09:41 PM
Kenne Bell for an 03 Cobra?	OKC03Cobra	Power Adders	5	07-07-2003 05:28 PM
Kenne Bell on speed density	Yan88gt	Windsor Power	7	12-05-2001 12:30 PM
Kenne Bell SC users please help!	91notch	Windsor Power	0	08-31-2001 03:59 AM