Knowledge Needed on 5.0 Mustang Engine

vanessa1156 · 08-12-2005, 03:24 PM

Howdy out there, i'm a chick and i know hardly anything about cars. I was wondering if someone could tell me what the specs are on the 5.0 mustang engine. I'm looking to buy this ford bronco II and it has this engine in it. I was just curious to see what exactly that means. Thanks everyone!

Mr 5 0 · 08-12-2005, 04:42 PM

The 5.0L is a great engine and very durable.

The pre-1993 (stock) 5.0L V-8 HP rating was 225, Torque was 300 lb/ft and the compression ratio was 9.0 (used regular gas). The 5.0 had Mass Air, EFI (Electronic Fuel Injection) and standard ignition (has a distributor). 5.0 liters of displacement translates to 302 cubic inches, which is a very decent displacement size...not too big - or too tiny. The later Mustang V-8's are a 4.6L displacement or 281 cubic inches, just as a comparison. Gas mileage isn't great (in the high teens, usually) but the performance makes up for that. Highly recommended engine, even in a Bronco.

vanessa1156 · 08-13-2005, 01:42 AM

thanks so much mr. 5 0, your info helped out tremendously. I'm a teenager looking to buy my first car and i'd like something in the small suv range so it's good to know there are people in the world that still know what the hell they are talking about. Haha, thanks again.

Mr 5 0 · 08-13-2005, 01:10 PM

It was my pleasure, Vanessa. Good luck with your first new car.

Crazy Horse GT · 08-13-2005, 10:04 PM

good luck vanessa, the 302 is a great engine, check out how many mile's it has & the maintenece that has been done on it also, if possible, mr 5.o know's what he's talking about, l8ter, hope it turn's out ok for you.

Unit 5302 · 08-14-2005, 12:01 PM

Technically the Mustang 5.0 has been around since 1982 so I'd be asking the seller what year that 5.0 is. (Prior to 1982 the engine was referred to as the 302) In 1983-1985 there were two versions of the 5.0 in the Mustang. A carbeurated version with a 4bbl carbeurator, and a CFI (central fuel injected) engine. There were significant differences in the power production of the two engines.

1982 - 157hp@4200rpm, 240lb/ft@2400rpm 2bbl
1983 - 175hp@4200rpm, 245lb/ft@2400rpm 4bbl
1984 - 175hp@4200rpm, 245lb/ft@2400rpm 4bbl
1984 - 165hp@3800rpm, 245lb/ft@2000rpm CFI
1985 - 210hp@4400rpm, 270lb/ft@3200rpm 4bbl
1985 - 165hp@3800rpm, 245lb/ft@2000rpm CFI
1985 - 180hp@4200rpm, 260lb/ft@2600rpm CFI - HO
1986 - 200hp@4000rpm, 285lb/ft@3000rpm HO
1987 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1988 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1989 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1990 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1991 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1992 - 225hp@4200rpm, 300lb/ft@3200rpm HO
1993 - 205hp@4200rpm, 285lb/ft@3200rpm HO
1993 - 235hp@4600rpm, 280lb/ft@4000rpm Cobra
1994 - 215hp@4200rpm, 285lb/ft@3200rpm GT
1994 - 240hp@4600rpm, 285lb/ft@4000rpm Cobra
1995 - 215hp@4200rpm, 285lb/ft@3200rpm GT
1995 - 240hp@4600rpm, 285lb/ft@4000rpm Cobra

As far as desirability, I'd rate them in this order.

1993 Cobra
1994-1995 Cobra
1987-1988 HO
1989-1992 HO
1993 HO
1985 4bbl
1986 HO
1983-1984 4bbl
1982 2bbl
1985 CFI HO
1984-1985 CFI

08-12-2005, 03:24 PM	#1
vanessa1156 Registered Member Join Date: Aug 2005 Posts: 2	Knowledge Needed on 5.0 Mustang Engine Howdy out there, i'm a chick and i know hardly anything about cars. I was wondering if someone could tell me what the specs are on the 5.0 mustang engine. I'm looking to buy this ford bronco II and it has this engine in it. I was just curious to see what exactly that means. Thanks everyone!

08-12-2005, 04:42 PM	#2
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Re: Knowledge Needed on 5.0 Mustang Engine The 5.0L is a great engine and very durable. The pre-1993 (stock) 5.0L V-8 HP rating was 225, Torque was 300 lb/ft and the compression ratio was 9.0 (used regular gas). The 5.0 had Mass Air, EFI (Electronic Fuel Injection) and standard ignition (has a distributor). 5.0 liters of displacement translates to 302 cubic inches, which is a very decent displacement size...not too big - or too tiny. The later Mustang V-8's are a 4.6L displacement or 281 cubic inches, just as a comparison. Gas mileage isn't great (in the high teens, usually) but the performance makes up for that. Highly recommended engine, even in a Bronco. __________________ 5.0 Mustang Owner 1990 - 2005

08-13-2005, 01:42 AM	#3
vanessa1156 Registered Member Join Date: Aug 2005 Posts: 2	Re: Knowledge Needed on 5.0 Mustang Engine thanks so much mr. 5 0, your info helped out tremendously. I'm a teenager looking to buy my first car and i'd like something in the small suv range so it's good to know there are people in the world that still know what the hell they are talking about. Haha, thanks again.

08-13-2005, 01:10 PM	#4
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Re: Knowledge Needed on 5.0 Mustang Engine It was my pleasure, Vanessa. Good luck with your first new car. __________________ 5.0 Mustang Owner 1990 - 2005

08-13-2005, 10:04 PM	#5
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	Re: Knowledge Needed on 5.0 Mustang Engine good luck vanessa, the 302 is a great engine, check out how many mile's it has & the maintenece that has been done on it also, if possible, mr 5.o know's what he's talking about, l8ter, hope it turn's out ok for you. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

08-14-2005, 12:01 PM	#6
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	Re: Knowledge Needed on 5.0 Mustang Engine Technically the Mustang 5.0 has been around since 1982 so I'd be asking the seller what year that 5.0 is. (Prior to 1982 the engine was referred to as the 302) In 1983-1985 there were two versions of the 5.0 in the Mustang. A carbeurated version with a 4bbl carbeurator, and a CFI (central fuel injected) engine. There were significant differences in the power production of the two engines. 1982 - 157hp@4200rpm, 240lb/ft@2400rpm 2bbl 1983 - 175hp@4200rpm, 245lb/ft@2400rpm 4bbl 1984 - 175hp@4200rpm, 245lb/ft@2400rpm 4bbl 1984 - 165hp@3800rpm, 245lb/ft@2000rpm CFI 1985 - 210hp@4400rpm, 270lb/ft@3200rpm 4bbl 1985 - 165hp@3800rpm, 245lb/ft@2000rpm CFI 1985 - 180hp@4200rpm, 260lb/ft@2600rpm CFI - HO 1986 - 200hp@4000rpm, 285lb/ft@3000rpm HO 1987 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1988 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1989 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1990 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1991 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1992 - 225hp@4200rpm, 300lb/ft@3200rpm HO 1993 - 205hp@4200rpm, 285lb/ft@3200rpm HO 1993 - 235hp@4600rpm, 280lb/ft@4000rpm Cobra 1994 - 215hp@4200rpm, 285lb/ft@3200rpm GT 1994 - 240hp@4600rpm, 285lb/ft@4000rpm Cobra 1995 - 215hp@4200rpm, 285lb/ft@3200rpm GT 1995 - 240hp@4600rpm, 285lb/ft@4000rpm Cobra As far as desirability, I'd rate them in this order. 1993 Cobra 1994-1995 Cobra 1987-1988 HO 1989-1992 HO 1993 HO 1985 4bbl 1986 HO 1983-1984 4bbl 1982 2bbl 1985 CFI HO 1984-1985 CFI

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
68 Mustang Engine Swap pulley problems	kirkdickinson	Classic Mustangs	10	07-13-2008 07:45 PM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Classic Mustangs	8	06-16-2005 11:43 AM
engine questions for a 66 mustang	daccrow86	Classic Mustangs	1	09-17-2003 07:44 PM
Stupid Question?	SilverGT02	Modular Madness	4	07-06-2002 11:01 AM
Engine Shifting into radiator and also clucth broke	Stuffie0912	Classic Mustangs	2	12-03-2001 03:26 AM