Would a mismatched pulley setup casue any problems? I have March performance pulley's on the PS, the Crank, and the Water pump. But the Alt pulley is stock. What type of restrictions do you mean? Like having something inside the system causing a blockage?
Quote:
Originally posted by crazypete
Unscrew both halfway and do your best to get the PS fluid away from the threads then rtv silicone the threads and screw it back in. Solid nylon washer seals are useless. Then drain the PS fluid and replace it with ATF. The atf has detergent which will clean out the system. Sounds like something else is not right....maybe even a restriction that is raising pressure?
|
__________________
Red 1993 GT Street Machine
Best E.T. - 12.41/Best MPH = 108
Engine is a 1969 351 block w/393 stroker kit. Dynamic Roller Myte C4, 8 pt cage. Edlebrock Performer heads and Victor Jr. EFI, FRPP 30lb injectors & Cartech fuel system. MSD ignition. Sothside Machine bars & Sub-frames, adj. upper's, 3.73's, Koni rear shocks, much more
|