Lifters- What are the best replacements?
 

FMS, Crane, Comp, etc.....?

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

roller lifters are roller lifters really...
Whatever you can get the best deal on..(w/out some k-mart brand of course)
Are you sure yours are bad, or just replacing w/ a cam swap??



------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

I'm planning on doing a head/cam swap pretty soon.

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

I would get the Crane ones. They are good quality and about the cheapest. I got mine for $109 from Mustangs Unlimited.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.759
Best MPH 106.79
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

You definately want to get good quality ones because the cheaper ones may "pump up" and collapse at higher rpm. You may just want to buy the cam and lifters as a package deal, you'll probably get a good price buying them together.

------------------
'84 Mustang 5.0 LX
My car

I have the fms lifters. They are good quality and they were inexpensive

Got mine from summit for $109, haven't had any problems yet, going on two months..

------------------
88LX NOTCH, 88GT, 95 GT.