MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-20-2002, 10:40 PM   #1
JRowlette
Registered Member
 
Join Date: Apr 2001
Location: Bowling Green, KY
Posts: 95
Thumbs up Tremec 3550 & SPEC Stage 2

I just finished installing my Tremec 3550, SPEC Stage 2 clutch and billet steel flywheel yesterday and all I can say is my car feels awesome now. The main reason is when I pulled my old tranny out, I discovered it was actually a 4 cylinder T5!!! I realized this when my new pilot bearing fit kind of loose on the input shaft of the T5. I then found out that the first gear ratio in those is somewhere around 4.00!!! With a 4.10 rear, you could imagine how long 1st gear lasted!! What is even more amazing is that I have made 4 passes on it with slicks dumping the clutch a 5k!! I have a new respect for T5's now.
Anyway, the SPEC clutch is awesome. ZERO chatter and awesome pedal feel. SPEC recommended putting about 500 miles on it before giving it hell, but I doubt I will make it that far. Does that rule not apply with a new flywheel?
__________________
'90 Black Notch: TFS TW heads, Stage 1 Cam, Street Intake, FMS 1.6 rockers, Kirban AFPR, 24# injectors, C&L 76mm MAF, 70mm Accufab TB/EGR, Tremec 3550, SPEC Stage 2 & Billet Flywheel, Alum DS, 4.10's w/ 31 Spline Eaton, Full MAC exhaust, etc.
286.7 RWHP @ 5100rpm, 313.7 TQ w/stock MAF, Inj, TB, and no tune
Race weight : 3090 # w/ driver
New Best - 12.82@107.9 w/1.74 60'
JRowlette is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tremec 3550, aluminum fly & clutch INSTALLED! 302 LX Eric Windsor Power 3 10-01-2001 04:05 PM
Installing new Tremec 3550 - a few questions 302 LX Eric Windsor Power 6 08-23-2001 03:04 PM
SPEC stage III clutch installed.....11's here I come! Rick 91GT Windsor Power 4 08-06-2001 10:50 AM
Longtubes w a Tremec 3550? fastang Windsor Power 2 03-15-2001 07:43 PM
tremec 3550 swap 97 Aztec Modular Madness 2 12-03-1999 09:12 PM


All times are GMT -5. The time now is 08:06 PM.


SEARCH