Looking to get a blower. Have a few questions.

bigred90gt · 01-09-2003, 09:09 PM

I am considering buying a blower for the stang. If I go through with it, what new parts will I need? I know I will need bigger injectors, a new fuel pump to supply the injectors, a bigger MAF, new intake heads and cam. What about pistons? Do I have to lower the compression ratio or is this just something people do to get the most out of their systems? I am not trying to set any records with it, I just want to know that when I stomp on it, it is going to go. All suggestions are appreciated.

Caymon

drudis · 01-10-2003, 02:46 PM

Get the Vortech HO 8# S-trim. It'll come with every single nut/bolt and wire-tie that you need for the install. If you use the FMU, no custom chips will be needed...

Contact www.alternativeauto.com . Thats where I got mine. Maybe not THE cheapest place on Earth, but that is who YOU need to have help you under customer service (which is EXCELLENT).

p.s. Look in my homepage MODS and ENGINE sections for my parts lists...

Hozer 88GTConv · 01-10-2003, 09:50 PM

Another vote for vortech, except I like the SQ....so nobody knows.

No badges, no stickers, no wings....just power.

01-09-2003, 09:09 PM	#1 (permalink)
bigred90gt 2 Stangs in the Stable Join Date: Apr 2002 Location: Baytown, TX Posts: 1,207	Looking to get a blower. Have a few questions. I am considering buying a blower for the stang. If I go through with it, what new parts will I need? I know I will need bigger injectors, a new fuel pump to supply the injectors, a bigger MAF, new intake heads and cam. What about pistons? Do I have to lower the compression ratio or is this just something people do to get the most out of their systems? I am not trying to set any records with it, I just want to know that when I stomp on it, it is going to go. All suggestions are appreciated. Caymon __________________ '90 GT Under construction Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!! 04 F-150 STX 4.2L 5 spd Rice Haters Club Member #128

01-10-2003, 02:46 PM	#2 (permalink)
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	Get the Vortech HO 8# S-trim. It'll come with every single nut/bolt and wire-tie that you need for the install. If you use the FMU, no custom chips will be needed... Contact www.alternativeauto.com . Thats where I got mine. Maybe not THE cheapest place on Earth, but that is who YOU need to have help you under customer service (which is EXCELLENT). p.s. Look in my homepage MODS and ENGINE sections for my parts lists... __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

01-10-2003, 09:50 PM	#3 (permalink)
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	another... Another vote for vortech, except I like the SQ....so nobody knows. No badges, no stickers, no wings....just power. __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Questions about Alky/Water injection with a positive displacement blower	stangsrule	Power Adders	0	07-22-2003 01:58 PM
Have questions about your blower? J.R. Granatelli attending chat tonight!	88COBRA	Windsor Power	0	02-12-2003 11:59 AM
Another blower question	bigred90gt	Windsor Power	2	01-12-2003 11:14 AM
Novi blower problem	exgmguy	Windsor Power	3	05-19-2002 12:30 AM
blower questions powerdyne, vortech	smokedchevy	Windsor Power	3	03-31-2001 08:50 PM

Sponsored Links