Low 14's with an aod???

joey50gt · 04-27-2001, 02:43 PM

ok i got my 4.10's in and there are bad ***
but i want to know if i could run low 14's
with my stock aod, a ported explorer intake upper and lower,4.10's,under drive pullies,upper control arms,and a new set of street tires,and timing set at 14* to 16*
Thanks ahead of time for any help.

Josh91 · 04-27-2001, 04:23 PM

Maybe if you have a coupe of something real light. Get a 2800-3000 stall converter, lose some weight, get some sticky tires and you'll get it easy.

------------------
91 GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, Flows w/dumps, FMS 4.10's, Steeda STB, StangNet LCA's, for now...

Original GT-40P Tech Page

[This message has been edited by Josh91 (edited 04-27-2001).]

NOS_Notch · 04-27-2001, 05:40 PM

my '90 GT was AOD.....it went 14.40's
w/ low gear set, 3.73's and 2200 stall.
Ported GT-40 and thats about it.
I think you should be good for 14.20's.....

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

11's coming soon!!!!
Heads,intake and cam are all here

TheSloAod · 04-28-2001, 03:29 PM

my 93 gt with stock heads, intake, and cam runs 13.4 @ 104 MPH nothing on the car is ported and the heads and intake have never been off, i use 373 gears though

FivepointOH · 04-28-2001, 10:40 PM

Umm that should definately get you there... look at my times in my sig.

------------------
92 AOD GT, K&N, ram air, pulleys, 2 ch. flowmasters, 4:10's, shift kit, 1 5/8 mac longtubes and offroad hpipe 14.249 @ 97.34 mph before the headers and hpipe

04-27-2001, 02:43 PM	#1
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	Low 14's with an aod??? ok i got my 4.10's in and there are bad *** but i want to know if i could run low 14's with my stock aod, a ported explorer intake upper and lower,4.10's,under drive pullies,upper control arms,and a new set of street tires,and timing set at 14* to 16* Thanks ahead of time for any help.

04-27-2001, 04:23 PM	#2
Josh91 Registered Member Join Date: Nov 1998 Location: Salina, KS Posts: 83	Maybe if you have a coupe of something real light. Get a 2800-3000 stall converter, lose some weight, get some sticky tires and you'll get it easy. ------------------ 91 GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, Flows w/dumps, FMS 4.10's, Steeda STB, StangNet LCA's, for now... Original GT-40P Tech Page [This message has been edited by Josh91 (edited 04-27-2001).]

04-27-2001, 05:40 PM	#3
NOS_Notch Registered Member Join Date: Sep 2000 Location: Fresno,CA. USA Posts: 384	my '90 GT was AOD.....it went 14.40's w/ low gear set, 3.73's and 2200 stall. Ported GT-40 and thats about it. I think you should be good for 14.20's..... ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.webprovider.com 11's coming soon!!!! Heads,intake and cam are all here

04-28-2001, 03:29 PM	#4
TheSloAod Registered Member Join Date: Apr 2001 Location: baytown, tx usa Posts: 121	my 93 gt with stock heads, intake, and cam runs 13.4 @ 104 MPH nothing on the car is ported and the heads and intake have never been off, i use 373 gears though

04-28-2001, 10:40 PM	#5
FivepointOH Registered Member Join Date: Jan 1999 Location: Sugar Land, Tx USA Posts: 478	Umm that should definately get you there... look at my times in my sig. ------------------ 92 AOD GT, K&N, ram air, pulleys, 2 ch. flowmasters, 4:10's, shift kit, 1 5/8 mac longtubes and offroad hpipe 14.249 @ 97.34 mph before the headers and hpipe