[bigred90gt]

I have the results from scanning the codes. They are as follows:
KOEO codes: 22, 85
Continuous memory: 22, 66
While running the KOER test, it gave me the engine Id. pulse. Then as per the given instructions, I turned the wheel and pressed the brake. About 8 seconds later, the rpm's slowly increased from about 900 to about 1200. They held at 1200 for about 5 seconds and then the opil pressure dropped and about 2 sec later, the engine died, When I cranked it back up, it gave me codes 12, 33, 18. Any translations would be greatly appreciated.
Once again, thanks for all your help.