© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
07-31-2002, 12:32 PM | #1 |
Registered Member
Join Date: Jan 1999
Location: Dale City Va.
Posts: 516
|
Manual Brakes Q'S
I bought the manual brake conversion kit from Holcomb but did not get the kit with the master cylinder included, just the rod and firewall block. I bought a 86SVO master cylinder to go with it but it is made for Power brakes and the rod is not long enough to work with it. It has a sunkin rod hole in it about 1 1/2 inches deep. My brake pedle is only 3 inches off the floor due to this. What master cylinders are you using with your kit's? Any help would be greatly appreciated!
Thanks
__________________
Currently rebuilding my 85 Mustang GT from the frame up. Check out my site for info on my car and specific information on the 85 Mustang. http://www.FlemWorld.com |
07-31-2002, 01:34 PM | #2 |
Registered Member
Join Date: Jan 1999
Location: Dale City Va.
Posts: 516
|
Forgot this info...
I have an 85 Mustang running 95 front disk brakes and lincoln disk brakes in the rear with a 9". I need a master cylinder that will work with the manual brake kit and 4 wheel disk brakes.
Thanks, Mike
__________________
Currently rebuilding my 85 Mustang GT from the frame up. Check out my site for info on my car and specific information on the 85 Mustang. http://www.FlemWorld.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Do Anti-Lock Brakes Suck? | Unit 5302 | Blue Oval Lounge | 29 | 04-22-2024 07:22 AM |
Pro's and Con's of Manual Brakes | RabidPony | Corner Carvers Delight | 0 | 06-01-2004 06:19 PM |
Manual Brakes | Barry Jackson | Windsor Power | 0 | 06-23-2003 09:36 AM |
manual steering and brakes | Barry Jackson | Windsor Power | 0 | 06-16-2003 08:39 AM |
Manual brakes proportioning valve? | ciara | Windsor Power | 0 | 07-07-2002 09:39 PM |