[Dark_5.0]

Originally Posted by 68Falcon

I made my own steering shaft using the stock shaft when I went to manual steering. I got the U joint I needed. The size for manual steering shaft it 9/16x26 spline. I cut the rag joint off and measured how long it needed to be and welded the u joint on. I also had to cut some off the tube that comes out the firewall so I can slide the shaft up in there to be able to get the u joint on the spline on the rack and pinion. It cost me 50 bucks for the u joint. That's all it cost me and 1 hour of my time. I go the rack and pinion from Advance Auto Parts for a 79 Mustang for $84 three years ago.

Thanks for the pics I ordered the U-joint