Engine wiring harness

glxstang · 03-13-2001, 10:12 PM

Anyone know of a company that makes a complete engine wiring harness replacment.It would be great to replace that old and cracked wiring which is 18 years old.

MSTANGfromSN · 03-14-2001, 12:42 PM

I think Windsor-fox makes them. They make complete harnesses to run EFI in classic stang so they should be able to help.
http://www.windsor-fox.com/

------------------
StangNet Event Cordinator
86GT-306 9.3:1, Holley Intake, Long Tubes, Alum Rad, Alum Drive shaft,87-93 brakes with 73mm calipers,T-5Z,Ram Racing Clutch,Subframes,Poly urethan bushings,Cat back,Crank Pully 70mm t-body & spacer 100shot of NOS & some other odds & ends

71Mustang Coupe 460 ported heads mild cam stealth intake ect.

MSTANGfromSN · 03-14-2001, 12:44 PM

sorry double post...

[This message has been edited by MSTANGfromSN (edited 03-14-2001).]

n2ojunkie · 03-15-2001, 04:39 AM

i belive painless wireing started making that harness also.

cjm · 03-15-2001, 11:47 AM

I think interactive systems as they also. They are located in Ga. They have a web site, but don't remember the address

MSTANGfromSN · 03-15-2001, 12:14 PM

Interactive Sytsems Technologies site hasn't worked for the longest time. I don't know if it's up & running yet.

03-13-2001, 10:12 PM	#1
glxstang Registered Member Join Date: Feb 2001 Location: Delray Beach, Florida Posts: 97	Engine wiring harness Anyone know of a company that makes a complete engine wiring harness replacment.It would be great to replace that old and cracked wiring which is 18 years old.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rebuilt Engine Problems	sleeperstang	Classic Mustangs	6	05-08-2003 10:19 AM
84 mustang factory gauge to engine wiring	radiotech	Windsor Power	0	09-23-2002 03:45 PM
Engine compartment wiring	glxstang	Windsor Power	3	06-17-2002 01:44 PM
Wiring Harness	Steve'83GLXConvertible	Small Ponies	2	12-19-2000 08:42 PM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Racer's Club House	0	05-12-1999 02:27 AM

03-14-2001, 12:42 PM	#2
MSTANGfromSN Registered Member Join Date: Mar 2001 Location: Balto. MD Posts: 35	I think Windsor-fox makes them. They make complete harnesses to run EFI in classic stang so they should be able to help. http://www.windsor-fox.com/ ------------------ StangNet Event Cordinator 86GT-306 9.3:1, Holley Intake, Long Tubes, Alum Rad, Alum Drive shaft,87-93 brakes with 73mm calipers,T-5Z,Ram Racing Clutch,Subframes,Poly urethan bushings,Cat back,Crank Pully 70mm t-body & spacer 100shot of NOS & some other odds & ends 71Mustang Coupe 460 ported heads mild cam stealth intake ect.

03-14-2001, 12:44 PM	#3
MSTANGfromSN Registered Member Join Date: Mar 2001 Location: Balto. MD Posts: 35	sorry double post... [This message has been edited by MSTANGfromSN (edited 03-14-2001).]

03-15-2001, 04:39 AM	#4
n2ojunkie Registered Member Join Date: Jan 2001 Location: san diego, ca Posts: 17	i belive painless wireing started making that harness also.

03-15-2001, 11:47 AM	#5
cjm Registered Member Join Date: Dec 2000 Location: tuscumbia, Al. Posts: 17	I think interactive systems as they also. They are located in Ga. They have a web site, but don't remember the address

03-15-2001, 12:14 PM	#6
MSTANGfromSN Registered Member Join Date: Mar 2001 Location: Balto. MD Posts: 35	Interactive Sytsems Technologies site hasn't worked for the longest time. I don't know if it's up & running yet.