© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
03-18-2002, 11:52 AM | #1 |
Registered Member
Join Date: Mar 2002
Location: Vestal, NY
Posts: 307
|
Gears
i'm sure I have 2.73's in my car, running 55 mph at 1500rpm. I am looking to get 3.55's in my car and I was wondering what rpms they would run at 55mph. Or how about any other gears if anyone has an idea. Thanks
__________________
1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates |
03-18-2002, 03:52 PM | #2 |
Registered Member
Join Date: Sep 2000
Location: Lafayette, Indiana
Posts: 120
|
I think I am running about 2000 rpm at 60mph with my 3.55's
__________________
89 GT convertible, Kenny Brown level 5, Edelbrock performer, AFR 165's, Comp cams XE270HR, C&L 76, 24# inj, Crane 1.7's, 70mm BBK throttle body 298.2 hp 328.2 tq Mustang dyno "Our lady of blessed acceleration don't fail me now" Elwood Blues |
03-18-2002, 07:15 PM | #3 |
Registered Member
Join Date: Feb 2002
Location: Apalachicola, FL.
Posts: 30
|
gears
I'm running 2100 at 55 with 4.10's with 5 speed.
__________________
306cid,BBk headers,24# racing inj.,75mm bullet,E-303 cam,keith black 10.5-1 pistons,holly ajust. fuel reg.,msd 6AL,msd billet distributor, trick flow intake with bbk 65mm Tb & EGR, world class HD trans. 4.10 gears and dynomax race mags. |
03-18-2002, 07:53 PM | #4 |
Registered Member
Join Date: Jul 2001
Location: Seattle, WA
Posts: 381
|
Auto in OD with 3.55 is about 1950...at ~70 mph.
__________________
What I have: 1990 Red Mustang 5.0 LX: [BBK X-Pipe]-[MAC Cat-Back Exhaust] [MAC Cold Air Intake]-[BBK Equal Shorties] [3.55 Gears]-[Cobra Intake Manifold (Upper and Lower] [E-303 Cam]-[Granetelli Mass Air Flow Sensor] [Front and rear sway bars]-[New black carpet and seats.] [Adjustable Fuel Regulator]-[T5 Conversion w/ K. Cobra Clutch/Hurst STS] [Cobra Throttle Body]-[130A Alt. Conversion] Thinking about: Aftermarket Heads! Vortech A-Trim |
03-18-2002, 08:43 PM | #5 |
Registered Member
Join Date: Mar 2002
Location: Vestal, NY
Posts: 307
|
Ok so somewhere around 2100 with a 5 spd? And where would I be able to get the new gears so my speedo isn't all screwed up?
__________________
1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates |
03-20-2002, 04:54 PM | #6 |
Registered Member
Join Date: Feb 2002
Location: Apalachicola, FL.
Posts: 30
|
gears
I used the speedometer gear kit from mustangsunlimited.com they have it all right there. Good luck. If you need help just ask.
__________________
306cid,BBk headers,24# racing inj.,75mm bullet,E-303 cam,keith black 10.5-1 pistons,holly ajust. fuel reg.,msd 6AL,msd billet distributor, trick flow intake with bbk 65mm Tb & EGR, world class HD trans. 4.10 gears and dynomax race mags. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
gears? | Spyder1914 | Small Ponies | 4 | 01-08-2003 02:23 PM |
Gears Gears Gears!!!! | COBRAon18s | Modular Madness | 20 | 05-13-2002 04:44 PM |
how can you tell what size gears you have? | Kamaro Killer | Windsor Power | 7 | 04-03-2002 02:55 PM |
Gears, need help!!!! | Edgar Negron | Windsor Power | 3 | 05-27-2001 03:10 PM |
Gears Gears Gears | Skyman | Windsor Power | 6 | 03-11-2001 11:39 PM |