This may be dumb question..........but I'm gonna ask anyway!

306bullet · 07-17-2003, 06:27 PM

I am putting Autolite 3924's in my AFR 185's. Which direction do the washers, that are supplied, go on the plug????? My mind is going blank, which it has been doing more and more lately

bigred90gt · 07-17-2003, 10:42 PM

I have honestly never heard of washers on a spark plug.

Mountain Main · 07-18-2003, 05:38 AM

But not on mustang heads. I think it depends on clearance that each head needs with the piston. I have washers on my spark plugs in my Honda Passport.

Mountain Main

PKRWUD · 07-18-2003, 07:21 AM

They are actually gaskets, and the proper way to install them is with the wider side towards the spark plug.

Take care,
~Chris

306bullet · 07-18-2003, 10:41 AM

Thanks PKRWUD !

TMAXXjj · 07-18-2003, 11:06 AM

Does it make a huge difference? I installed the gaskets backwards

PKRWUD · 07-18-2003, 02:48 PM

Quote:

Originally posted by TMAXXjj
Does it make a huge difference? I installed the gaskets backwards

OMG!!! Tell me you're joking!

i'm sorry, i couldn't resist. it really doesn't matter because once it's crushed, it's flat. but technically, the wide side goes to the plug. i promise you won't ever know the difference, though.

Take care,
~Chris

TMAXXjj · 07-20-2003, 11:45 AM

shewwww I almost ran to oreilleys to buy new plugs....

07-17-2003, 06:27 PM	#1 (permalink)
306bullet Registered Member Join Date: Jul 2002 Location: Indiana Posts: 51	This may be dumb question..........but I'm gonna ask anyway! I am putting Autolite 3924's in my AFR 185's. Which direction do the washers, that are supplied, go on the plug????? My mind is going blank, which it has been doing more and more lately

07-17-2003, 10:42 PM	#2 (permalink)
bigred90gt 2 Stangs in the Stable Join Date: Apr 2002 Location: Baytown, TX Posts: 1,207	I have honestly never heard of washers on a spark plug. __________________ '90 GT Under construction Best E.T. = Fast @ High Speeds - OK So I Lie. So What!!! 04 F-150 STX 4.2L 5 spd Rice Haters Club Member #128

07-18-2003, 05:38 AM	#3 (permalink)
Mountain Main Registered Member Join Date: Feb 2003 Location: Minturn, CO 81645 Posts: 109	I've seen washers But not on mustang heads. I think it depends on clearance that each head needs with the piston. I have washers on my spark plugs in my Honda Passport. Mountain Main

07-18-2003, 07:21 AM	#4 (permalink)
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	They are actually gaskets, and the proper way to install them is with the wider side towards the spark plug. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-18-2003, 10:41 AM	#5 (permalink)
306bullet Registered Member Join Date: Jul 2002 Location: Indiana Posts: 51	Thanks PKRWUD !

07-18-2003, 11:06 AM	#6 (permalink)
TMAXXjj Registered Member Join Date: Feb 2003 Location: Bowling Green, KY Posts: 11	Does it make a huge difference? I installed the gaskets backwards

07-20-2003, 11:45 AM	#8 (permalink)
TMAXXjj Registered Member Join Date: Feb 2003 Location: Bowling Green, KY Posts: 11	shewwww I almost ran to oreilleys to buy new plugs....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dumb Question -- Wipers	hcadra	Modular Madness	0	09-29-2003 02:57 PM
95 Cobra Hood question, its dumb but i grew up with the old cars	96_4.6	Blue Oval Lounge	1	01-06-2003 03:37 PM
dumb ***** question.	Poseidon	Modular Madness	1	11-28-2002 09:34 PM
hammer, dumb question ?	Crazy Horse GT	Modular Madness	5	08-17-2002 06:34 PM
Borla or Bassani (dumb question?)	ddb	Modular Madness	5	10-11-2001 05:37 PM

Sponsored Links