MustangWorks.com : Ford Forums - View Single Post

PeTr0 · 03-23-2003, 08:51 PM

I am 99% sure that i installed the brackets right (with the flat plate on the outside) but now that i finally got the holes lined up and the bolt through i found another problem. The bolt head is pretty much touching the axle and the stock bracket and the same problem on the other side with the washer and nut.....

03-23-2003, 08:51 PM	#1
PeTr0 Registered Member Join Date: Jun 1999 Location: Chicago, IL, USA Posts: 286	Mega Bite Jr. Users... I am 99% sure that i installed the brackets right (with the flat plate on the outside) but now that i finally got the holes lined up and the bolt through i found another problem. The bolt head is pretty much touching the axle and the stock bracket and the same problem on the other side with the washer and nut..... __________________ Red 1993 Gt- 3.55 gears,flowmasters,BBK Shortie Headers, BBK Hi-Flow H-Pipe, BBK cold air induction w/K&N, Pro 5.0 shifer,UPR Adjustable cable and quad, 130 amp alt., underdrives,65mm T-body,MegaBite Jr. Lowers and Heavy Duty HPM uppers, Koni Yellow struts & Shocks, FMS 'B' Springs, Aluminum Driveshaft, MSD 6AL and blaster tfi coil, sony cd player and changer, kicker component speakers, Kenwood Excelon amp, 2 12" subs in the hatch,Cobra R Rims and Nitto NT555 all around, timing bumped to 13 deg., ADS Superchip, and mobil 1 oil lubing the 302.