fat guy broke my seat

blk88lx · 12-11-2002, 03:34 PM

Hey all,

The d-side (closest to the door) seat rail in my 93 GT is broken. What will fit? It's the standard GT Seat. Will one off an LX be good? What year? Any help would be appreciated.

Jayson
93 GT

cyberstang5.0 · 12-11-2002, 03:58 PM

All Mustang (GT, LX, V6 and 4 bangers) front seats from 87-03 are interchangeable. I have a set of SN-95 GT seats in my Fox.

fiveohpatrol · 12-11-2002, 05:53 PM

any fox (including thunerbird, cougar...) seat from 79-03 will have a rail that will work.

I also have SN95 GT seats in my car, they bolted straight up

blk88lx · 12-11-2002, 06:40 PM

Great. Seems that if you get rails out of a 5.0 they want $$$. If you get'm out of a 2.3 then they only want $.

Jayson
93 GT

BLACK85GT · 12-11-2002, 09:35 PM

you are better off getting them from a 2.3 because they probably have not seen as much stress. The v8 puts more pressure on the occupant thus pushing the seat back more.

blue00gt · 12-12-2002, 01:03 AM

If your seat rail is broken you should probably check your floorpan also as they are notorious for tearing where the bolts go through for the seat.

drewmp28 · 12-12-2002, 12:26 PM

Maybe you just need to lose some weight!

12-11-2002, 03:34 PM	#1
blk88lx Registered Member Join Date: Jun 2001 Location: Fort Leonard Wood, MO Posts: 179	fat guy broke my seat Hey all, The d-side (closest to the door) seat rail in my 93 GT is broken. What will fit? It's the standard GT Seat. Will one off an LX be good? What year? Any help would be appreciated. Jayson 93 GT

12-11-2002, 05:53 PM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	any fox (including thunerbird, cougar...) seat from 79-03 will have a rail that will work. I also have SN95 GT seats in my car, they bolted straight up __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-11-2002, 09:35 PM	#5
BLACK85GT Registered Member Join Date: May 2002 Location: Tampa,FLORIDA Posts: 340	you are better off getting them from a 2.3 because they probably have not seen as much stress. The v8 puts more pressure on the occupant thus pushing the seat back more. __________________ 5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377

12-12-2002, 01:03 AM	#6
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	If your seat rail is broken you should probably check your floorpan also as they are notorious for tearing where the bolts go through for the seat. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

12-12-2002, 12:26 PM	#7
drewmp28 Registered Member Join Date: Dec 2002 Location: Maryland Posts: 11	Lose weight Maybe you just need to lose some weight!

12-11-2002, 03:58 PM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	All Mustang (GT, LX, V6 and 4 bangers) front seats from 87-03 are interchangeable. I have a set of SN-95 GT seats in my Fox.

12-11-2002, 06:40 PM	#4
blk88lx Registered Member Join Date: Jun 2001 Location: Fort Leonard Wood, MO Posts: 179	Great. Seems that if you get rails out of a 5.0 they want $$$. If you get'm out of a 2.3 then they only want $. Jayson 93 GT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I NEED A DRIVERS SEAT among other things.!	Topless In Texas	Blue Oval Lounge	13	02-08-2003 12:44 AM
68 Seat Back Adjustment	Kisner	Classic Mustangs	2	07-29-2002 11:46 AM
seat cushion	nextime	Windsor Power	1	04-12-2002 07:08 AM
1991 Back Seat Bracket???	jz_mustang50	Windsor Power	0	10-07-2001 08:39 PM
aI found a problem with the seat rails!!!!	SPEEDY88	Windsor Power	2	05-04-2001 07:53 PM