Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
07-24-2003, 11:08 AM
|
#1 |
|
Registered Member
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
|
more than a clutch slipping!!
Well, i knew something was wrong with the clutch, but i get underneath to find two missing bellhousing bolts!
 on the pass side, the longer bolts, the top ones were there, but loose.My question is, since this allowed a gap there for oil water ect.. to get in, could that be why my clutch slips now? Also, can i get these bolts from the dealer? right now i found two old head bolts i had, and they seem to fit perfect, is this not a good idea? im thinking the polyurethane trans moount creates vibration, and/or the hard launching i do at the track might cause this, do i have to stop racing to keep everything tight? sheesh..... Why me 
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clutch slipping, need help | bmxmon | Classic Mustangs | 2 | 06-08-2004 12:54 AM |
| Clutch slipping in 2nd, above 4000 rpm? | Fox Body | Windsor Power | 7 | 05-22-2003 06:27 PM |
| T-5 swap & cable clutch problem | LuvMyStang | Classic Mustangs | 0 | 03-19-2003 08:47 AM |
| billed 5 times to install clutch by Pauls Auto, please read and give opinions (long) | beefcake | Blue Oval Lounge | 2 | 02-23-2001 03:05 PM |
| Clutch is Slipping and T5 is busted!!!! | NO SLO PK | Windsor Power | 1 | 01-27-2001 03:26 PM |