Who has best price on 31 spline axles?
 

I have my 347 almost ready to run again and need 31 spline axles with c clip eliminators. Also need a spool.

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg

Try BB&T racing. They advertise in MM&FF.

------------------
1993 GT/AOD
'93 Mustang GT

Thanks Mach 1!

I just got mine directly from Strange. They sell 31 spline axels with the c-clip elim kit for $374.50. For another ten bucks they'll install the c-clip eliminators. There number is 847-869-7010. Hope this helps.

------------------
92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, BBK full length headers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, Eibach front drag springs, Moroso rear trick springs, no sway bar, battery in hatch, compucar N20 kit

IMPULSERACING,

I have found some Moser 31 spline axles for a little less than $385, $310 to be exact. However, I don't know if the c clip elims are installed. I need to do a little more investigating.

One distributor of Moser said that some machining to the axles is required on the Moser if you do not order with the c clips already installed.

Also, did you have to cut off some of your housing to fit the Strange? I have a copy of the Moser instructions and you are suppose to saw off 1/4".

[This message has been edited by 8850 (edited 04-22-2001).]