Threaded Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-26-2002, 06:26 AM
|
#1 |
|
Registered Member
Join Date: Apr 2002
Posts: 3
|
Motor Question
I have a 5.0 in a 93 XR7 and am thinking of a cam swap. I have a cam with these specs--
lobe lift- .322" int/exh lobe sep-110 deg. 2.06 deg adv 252 deg dur @ .020 221 deg dur @ .050 133 deg dur @ .200 The motor has a stock bottom end, iron pocket ported heads, stock gasket matched intake and exhaust, 3.55 gears and the low gear AOD kit in the trans. Is this a decent cam to put in? I am worried about piston to valve clearance with the stock set-up. I also have 1.7 rockers available- can and should I use them? Any other suggestions would be a great help. Thanks.............. |
|
|
|
|