Anyone here run a similar combo and if so, what times did it run?
 

Anyone on here use a similar combo and if so, what times are you seeing?

My combo:

Dart block 4.125
5.315 rod
3.4 stroke
@9:1 compression
Novi 2000 pullied up to max impellar speed
Victor Jr. Efi intake
70mm tb
83Pro Am maf
75lb injectors
Weldon 2015
3.73
AOD-e w/ triple disc lockup converter --- 5000 stall
3" custom x-pipe/flows/dumps
RIght now I have chitty 1 5/8 long tubes, but plan to go 1 3/4 to 1 7/8 stepped headers
Lunati 544/560 232/242 duration at .050 112 centerline
1.7 rockers
Twisted wedge heads---flow 270/210---may have more work done to them before assembling this combo
Car currently weighs 3500 with me. May take out a couple of hundred pounds though...


Thanks for the input guys

Car should fly. If you already went 11.0's then I dont see why it shouldn't go at least 10.50's or faster. The only thing I see wrong is the heads. Alot more work will be needed (flow at least @.600 on intake needs to be over 300 and exhust should be over 225 with out a pipe.) I would also say the chamber will also need to be open because of your 4.125 size bore. But besides all that you really need volume. (a larger cc head like... the Afr 205, 225 or the TFS'R head with porting! Then I would say an easy 9 sec combo, if it hooks and goes straight.
My 2 cents but, what do I know!
Good Luck

Seems to me like it should go high 9's. That is a lot of blower...
I agree a better set of heads would help you immensly as well.

~28lbs. of underwear staining goodness :eek: