msd on 79-85 mustangs ?

83GTMUSTANG · 05-12-2005, 02:19 AM

DOES ANYONE HAVE TACH PROBLEMS WITH THERE MSD ON 79-85 DURA SPARK MAGNETIC PICK UP DISTRIBUTER SYSTEMS, CAUSE I CANT GET MY AFTERMARKET TACH TO WORK WITH THE TACH PLUG ON THE MSD BOX HELP PLZ

surfsup · 05-12-2005, 06:13 AM

I used the Mallory had no problems with my autometer tach, if you look in the instructions; there’s a table that tells you what tachs may need the adapter to work.

tarmon8r · 05-12-2005, 08:59 PM

Your tach should plug into your msd box not your distributor so the dura spark doesnt matter.

BLACK85GT · 05-12-2005, 09:08 PM

My autometer tach works fine with the MSD out put.

red82gt · 05-20-2005, 09:33 PM

Quote:

Originally Posted by BLACK85GT

My autometer tach works fine with the MSD out put.

Same here.

74NOVA · 05-14-2005, 05:16 PM

Well make sure all your connections to and from the tach are good, because my buddy had the same problem with his sun pro tach and it turned out to be a bad connection.

05-12-2005, 02:19 AM	#1
83GTMUSTANG N-V-ME Join Date: May 2005 Location: SOUTHFIELD,MICHIGAN Posts: 155	msd on 79-85 mustangs ? DOES ANYONE HAVE TACH PROBLEMS WITH THERE MSD ON 79-85 DURA SPARK MAGNETIC PICK UP DISTRIBUTER SYSTEMS, CAUSE I CANT GET MY AFTERMARKET TACH TO WORK WITH THE TACH PLUG ON THE MSD BOX HELP PLZ

05-12-2005, 06:13 AM	#2
surfsup Registered Member Join Date: Sep 2004 Location: jersey Posts: 147	Re: msd on 79-85 mustangs ? I used the Mallory had no problems with my autometer tach, if you look in the instructions; there’s a table that tells you what tachs may need the adapter to work.

05-12-2005, 08:59 PM	#3
tarmon8r Registered Member Join Date: Jun 2002 Location: manassas, va Posts: 186	Re: msd on 79-85 mustangs ? Your tach should plug into your msd box not your distributor so the dura spark doesnt matter. __________________ 1983 mustang, 393 cubic inch stroker small block, victor jr heads and intake, gold race 1.6 roller rockers. comp cam 304, 244@ .050. .576" hydralic retro roller cam,lunati rods. block was o-ringed,10:1 forged pistons, speed pro fit fit rings, clevite bearings,msd distributor and igniton,be cool huge radiator, black lite electric fan, march underdrive pulleys, mildon deep sump oil pan, mac 1 3.4" long tube headers, 3" dr gas x-pipe and mac exhaust,ARP bolts. car weighs 2900 lbs w/out driver, sub frames, weld wheels, mickey thompson sportsman pro 26 x 10.5 x 15's,#8 fuel line steel braided

05-12-2005, 09:08 PM	#4
BLACK85GT Registered Member Join Date: May 2002 Location: Tampa,FLORIDA Posts: 340	Re: msd on 79-85 mustangs ? My autometer tach works fine with the MSD out put. __________________ 5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377

05-14-2005, 05:16 PM	#6
74NOVA Registered Member Join Date: May 2005 Posts: 10	Re: msd on 79-85 mustangs ? Well make sure all your connections to and from the tach are good, because my buddy had the same problem with his sun pro tach and it turned out to be a bad connection.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
Mustangs in snow, almost bit it	Rice Hunter	Blue Oval Lounge	28	12-10-2002 03:29 PM
Central Jersey Mustangs & Fords 2nd Cruise Night!!!!	NJStangFan	Ford Show & Go	4	08-02-2002 01:16 PM
Awesome,Fast Paced Night. 7 Mustangs and one 99 Z28 6spd. I Toast a 94 Cobra.	Mercury	Stang Stories	7	10-30-2001 01:08 PM