Need advice for a 95 mustang GT
 

Hi all, I have a 95 mustang GT 5 speed with a few modifications which are 2 chamber flow master muflers, march pulleys, k&n air filter, jet performance chip, stage 1 NOS kit(just need to hook it up) and 3.73 gears. I decided I wanted to give my mustang some more power and I bought a performer rpm intake, and a 70mm throttle body. The question I have is it worth the extra $1000 to get the performer heads from edelbrock or should i spend the money on something else, and also should I change my injectors, or anything else?

Any advice would help, thanks. :)

Get the heads for sure. They will make a huge difference in your HP output.

Heads and gears are the two most noticeable mods you will do N/A.

Later,

Oh!! absolutely, look like you are planning it the right way. I would put the head before I change anything because stock head is very restricted. Once you do the head the next thing would be intake,TB,mass air meter and then the whole exhaust system. You mentioned that you have NOS with 75 shots then I would put new fuel pump just to be on the safe side.

Edel. hds.
 

Definitely complete the entire combo you are beginning to piece together. Just putting on an aftermarket intake won't boost your power that much. But adding performance heads & a bigger cam with that intake...you'll be very impressed with the results. I run the Edel. intake/ B-303/ & Performer RPM Edel. alum. heads w/ 2.02/1.60 valves and am very happy with the outcome.