Need a decision FAST - Magnaflow 3.5" tips or Borla?

NO SLO PK · 02-15-2002, 03:26 PM

Well it's a long story, but I've got to make a choice between Magnaflow 3.5" tips or Borla tips. Not to offend anyone, but I'm afraid the Magnaflow tips might look too "ricey". Money is an issue (as always), and the Borlas cost more.

The car's at the shop right now, and I've got to make a decision fast.

TIA!!!

Coupe Devil · 02-15-2002, 05:22 PM

BORLA

95mustanggt · 02-15-2002, 06:22 PM

Can't really go wrong with Borla.

GodStang · 02-16-2002, 11:22 AM

I will have to be different and say BORLA!!! oh wait that is the same. Borla is the best there is . Good luck man.

Skyman · 02-16-2002, 02:32 PM

3.5"?? Damn that is huge!!!

NO SLO PK · 02-17-2002, 06:21 PM

The deal's done. Here's the 411:

I went with the round Borla tips for a 94-95 Mustang. They are about 3" in diameter. They attach to an aluminized 2.5" pipe from a Dynomax kit for a 94-95. The aluminized pipe is showing and it looks really crappy.

I ALREADY had a nice 2.5" dynomax system with stainless piping. Unfortunately, the new panhard rod was interfering with the exhaust. So a custom exhaust had to be rigged to clear the panhard.

02-15-2002, 03:26 PM	#1 (permalink)
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	Need a decision FAST - Magnaflow 3.5" tips or Borla? Well it's a long story, but I've got to make a choice between Magnaflow 3.5" tips or Borla tips. Not to offend anyone, but I'm afraid the Magnaflow tips might look too "ricey". Money is an issue (as always), and the Borlas cost more. The car's at the shop right now, and I've got to make a decision fast. TIA!!! __________________ Russ L '91 LX - 331 w/ Procharger '03 Cobra Convertible - Pullied '94 Lightning '65 Mustang Coupe

02-15-2002, 05:22 PM	#2 (permalink)
Coupe Devil The Pickup Man Join Date: Mar 2001 Location: Turn off the Paved Road Posts: 1,636	BORLA __________________ My Truck 1986 Coupe, 429, c6, some other stuff if I ever get rich. Built Ford Tough Moderator

02-15-2002, 06:22 PM	#3 (permalink)
95mustanggt Mustang is Parked :( Join Date: May 2000 Location: Kamloops, BC Posts: 2,874	Can't really go wrong with Borla. __________________ 1995 Mustang GT 2005 F150 FX4 Super Crew RiceHatersClub.com

02-16-2002, 11:22 AM	#4 (permalink)
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,095	I will have to be different and say BORLA!!! oh wait that is the same. Borla is the best there is . Good luck man. __________________ 2003 Sonic Blue Cobra www.ifitsfast.com www.stangbay.com tell them GodStang sent you!!

02-16-2002, 02:32 PM	#5 (permalink)
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	3.5"?? Damn that is huge!!! __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

02-17-2002, 06:21 PM	#6 (permalink)
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	The deal's done. Here's the 411: I went with the round Borla tips for a 94-95 Mustang. They are about 3" in diameter. They attach to an aluminized 2.5" pipe from a Dynomax kit for a 94-95. The aluminized pipe is showing and it looks really crappy. I ALREADY had a nice 2.5" dynomax system with stainless piping. Unfortunately, the new panhard rod was interfering with the exhaust. So a custom exhaust had to be rigged to clear the panhard. __________________ Russ L '91 LX - 331 w/ Procharger '03 Cobra Convertible - Pullied '94 Lightning '65 Mustang Coupe

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Sponsored Links