© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
06-15-2001, 09:34 AM | #1 |
Registered Member
Join Date: Jan 2001
Location: hurst,texas,america
Posts: 95
|
NEED A GUESS ON 1/4 MILE TIMES PLEASE
GUYS SINCE MY CAR IS AN AOD DO YOU ALL THINK I COULD RUN A 13.5 WITH THE POWERDYNE ON A STOCK MOTOR WITH 4.10's OR IS THAT OUT OF THE QUESTION?
THANKS FOR ANY HELP ON THIS QUESTION AHEAD OF TIME |
06-15-2001, 12:22 PM | #2 |
Registered Member
Join Date: Feb 2001
Location: Westchester, IL
Posts: 37
|
My buddy has a '89LX Convert. and ran a 13.3 on drag radials with a Vortech A-trim (10lbs boost), 4.10's, stock AOD, and 24lb/hr injectors, bigger fuel pump, and full exhaust. Everything else is bone stock, right down to the suspension. The car wasn't even tuned yet.
Not to scare you or anything, he ended up breaking his trans. on the way home. A stock AOD is pretty weak. |
06-15-2001, 01:08 PM | #3 |
Guest
Posts: n/a
|
My guess is that you'll break 13.5, but will need a new tranny etc etc soon thereafter.
------------------ '90 LX 5.0; 12K original miles (no sh*&); 3.55 gears; pulleys;Edelbrock Performer Heads; BBK shorties; MSD 6AL box w/ blaster 2 coil; Motorsport E303 cam; Pro-M 75mm MAF; BBK 70mm TB; Eibach spring kit; Southside welded subs; K&N cone filter charger; Hurst shifter; fiberglass turbo hood; A/C-less; rear seat-less; cat-less; 2 chamber Flos; Corbeau racing seats (fronts); 30# injectors; JMS Chip; 190 lb fp; TFS track heat Intake (12.299 @ 113) |
06-15-2001, 02:45 PM | #4 |
RICE taste like Chicken
Join Date: Jun 2000
Location: Edmond, OK
Posts: 687
|
My buddy had a 92 LX with exhaust, 3.73's and a 9# BD-11 and ran a 12.8 @ 108 on slicks.
------------------ Dustin Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's 12.3@119 |
06-15-2001, 05:37 PM | #5 |
Registered Member
Join Date: Oct 1999
Location: Cincinnati, Ohio
Posts: 1,575
|
With traction, I hope you would at least run a 12.5.
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.759 Best MPH 106.79 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html |
06-15-2001, 06:18 PM | #6 |
Registered Member
Join Date: Feb 1999
Location: Utica, Michigan
Posts: 2,631
|
13.5 would be my slowest guess. With decent traction I would say 13.0's.
|
06-16-2001, 07:32 PM | #7 |
I need 110mph Trap Speed!
Join Date: Feb 1999
Location: So, CA
Posts: 4,315
|
Be realistic. Mid 13's is a good guess. When you bring all the supporting equipment along 12's will come easy.
Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, E-303, edelbrock intake,70MM TB, 73mm MAF, off road H, headers and 3chamber flows. 12.55@107mph 50-175 Nitrous Works WET Kit just added. |
06-16-2001, 10:37 PM | #8 |
Mustang Maniac
Join Date: Sep 2000
Location: GA, U.S.A
Posts: 2,266
|
I would be looking for low 13s if I had that car.
------------------------------- '79 Mustang Coup w/ 4" Cowl Stock 5.8L, C4 w/ shift kit Holley 750 cfm, Edelbrock Performer RPM intake 1 5/8" MAC shorty headers, Al driveshaft 2.5" Off road H-pipe, 2-chamber Flowmasters Front: 225/60/15, Rear: 255/60/15 Eagle GT II Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s 14 x 4” K&N air filter (getting the Xtreme setup someday) "Red, thou art my companion. Hasten now your quickened metamorphosis to Green that I may conquer all who dare abide there beside me. May they be left thither behind burnt black." ---Fox Body |
06-17-2001, 12:41 PM | #9 | |
The Dude
Join Date: Feb 2001
Location: Arlington, VA
Posts: 1,262
|
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1/4 mile times? | chiaronate | Windsor Power | 33 | 11-01-2003 10:48 AM |
01, 02 Mustang GT 1/4 mile times? | CAMARO GUY | Stang Stories | 13 | 01-01-2003 02:34 PM |
1/4 mile time?? | '89GTStang | Windsor Power | 5 | 10-06-2002 05:15 PM |
1/4 Mile Times For 99+ GT's | V12Stang | Modular Madness | 7 | 04-19-2001 04:30 PM |
1/4 mile times (all years) | andrewgarland | Windsor Power | 2 | 02-23-2001 08:48 AM |