MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Need help ! (http://forums.mustangworks.com/showthread.php?t=1031)

jjak88 02-18-2001 11:40 PM

Need help !
 
I just installed a TFS intake and a 70 mm tb on my speed density car. When I start the car it runs really rich, has a rough idle, and if you put you hand on the intake every once in a while you can feel a pop. the timing is at 13 deg. Do I have to switch to mass air, or is there another fix?

Rick 91GT 02-18-2001 11:52 PM

What fuel pressure and timing are you running, what cam?

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

jjak88 02-19-2001 12:03 AM

I'm running at 13 deg,have a stock cam, and still have the stock fuel pressure regulator

WildTang69 02-19-2001 12:37 AM

Quote:

Originally posted by jjak88:
I'm running at 13 deg,have a stock cam, and still have the stock fuel pressure regulator
You need to change your mass air.


All times are GMT -5. The time now is 03:53 AM.