Need Help...........
I POSTED THIS ON ANOTHER SITE TOO....MAYBE YOU GUYS CAN HELP ME OUT ALSO................read on--------->
im ready to buy injectors now....but i have no idea how much power i'll be making, and i obviously need a ballpark figure.
everyone keeps telling me 83lbers would be perfect, and i'll have room to grow.
heres my combo:
dart block 347
eagle 4340 crank(3.4)
eagle h beam rods(5.4)
je dish pistons (8.5:1)
afr 205's
victor 5.0
75mm tb (fox style conversion)
80mm mass air
anderson b-451 cam
3.73 gear w/27x11.5 quick time pro hoosiers
tko 5 spd
ys trim (which i have no pulleys for yet)
i will probably boost around 15-17 to start off then if its safe,go up a little to 18-20. i have the pms with low impendance driver (no interaq software)
i have no idea what kind of power i'll be making...or what it will run in the 1/4....mph...ect.
can anyone shoot me a ballpark figure....so i can figure out what injectors i need to pick up. everyone keeps asking me how much power im shooting for.....but its really how ever much i end up with. LOL
this is a full weight (tubular k member, no pass...or back seat) 95gt...i was told i should be somewhere in the 9.30-9.50 range, but again...i have no idea what kind of power that is...600-700-750??????
btw: i can drive the car so the 5spd isnt going to be that much of a limiting factor
it will run on 100unleaded all the time...if i need to i can run 110
sorry about the "NEWBIE"-like question....i need injectors and pulleys so i can get this thing running
thanks
|