Need Help, Budget Drag Suspension...
I want a good drag suspension, but i dont have a lot of money to play around with, so here is what i have to ask.
i was told to put 4cyl springs in, but only up front, is this correct?
i want 70/30's, and 50/50's, along with some SSM liftbars, and uppers, or some other tye of controll arm. what controll arms would you reccomend?
i am going to start off with the 4cyl springs(front and back, or just front?) along with pulling the sway bar, and then try to save for a decent tire(how are the m/t sportsman pros? drag radials are around 340 each, and the et streets are 260 each, the sportsman pros are 190 each) that i can drive to the track on(and around town on some nice days).
what else am i mission for suspension?
thanks
__________________
1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1
88 GT
Best 60ft. 2.181
Best ET 14.350
Best MPH 98.01
~WRECKED!!!!~
|