t-5 swap

halffast82 · 03-04-2007, 07:11 PM

Hey folks,
I need some help here. I have a 351w installed in my 82 gt. I have a T-5 I am going to install. I need to know the proper bellhousing
part numbers that I can use to find one. Can you help?
Thanks

Jeff Chambers · 03-05-2007, 12:13 PM

It'll use the same bellhousing as for the 302. The factory bell will work, or go to a Lakewood or McCleod blow can.

03-04-2007, 07:11 PM	#1
halffast82 Registered Member Join Date: Mar 2007 Posts: 1	t-5 swap Hey folks, I need some help here. I have a 351w installed in my 82 gt. I have a T-5 I am going to install. I need to know the proper bellhousing part numbers that I can use to find one. Can you help? Thanks

03-05-2007, 12:13 PM	#2
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	Re: t-5 swap It'll use the same bellhousing as for the 302. The factory bell will work, or go to a Lakewood or McCleod blow can. __________________ Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T5 to AOD swap	Scrapla	Windsor Power	24	04-12-2004 12:40 PM
need help with my AOD to T5 swap	megatron5.0	Windsor Power	1	03-06-2004 03:13 PM
3.8 swap to 5.0, help!	stang_guy_95	Windsor Power	5	07-07-2002 01:12 AM
2.3 to 5.0 swap	tireburner163	Windsor Power	1	09-09-2001 09:59 AM
AOD to T-5 swap	Kirk91LX	Blue Oval Lounge	2	02-26-2001 10:25 PM