MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Need hints on installing a Big Block in a Fox Body!! (http://forums.mustangworks.com/showthread.php?t=6705)

Mac_5.0 11-05-2001 10:39 PM

Need hints on installing a Big Block in a Fox Body!!
 
I have a 1993 coupe and I plan on swapping in a 460 with a C6 and a 9". Any hints on some common problems or some "musts" in the upgrade department? I know what mounts to use, but what about tranny mounts? Any hints, web page links or suggestions would be great!

Thanks in advance!

------------------
See Ya on the track boyz!

shovelnose 11-06-2001 05:26 PM

Ya I'm about to do the same thing. I to am open to any advice.
http://www.members.tripod.com/tomak3/page4.html

That guy put one in.

Forcedpower 11-07-2001 12:52 PM

A friend of mine put a 460 in his 91 GT. It fills the engine compartment up thats for sure. He is running a powerglide for his tranny. Another guy at the track has run a c6 and a c4 behind his 460 think he went back to the c6 though not sure how he mounted it.

------------------
'93 LX 425rwhp/410rwtq

blue00gt 11-07-2001 06:19 PM

Get yourself a shoehorn and a sawzall.

Red514LX 11-07-2001 08:28 PM

Using a Glide on the car is good if you don't mind a really high (and thus not very streetable) rear gear and stall converter. Plus, you are going to have to strip your car down to less than 3,000lbs. Everyone I have ever talked with on the powerglide subject says that if the car will weigh more than 3,000lbs, then the glide isn't for it.

I'm doing a 460/514 project in my spare time that's going to take me about 7 years (already been 3). Because I want this to be a street car 1st and a track car a distant 2nd, I am going to go with a TH400 (not a ford tranny).

It is lighter than a C6 and has less internal rotating mass so it won't soak up as much power as a C6. It'll hold the horses though if built right. With a 3 speed, I will be able to run a lower (numerially) rear gear and not such a high stall (perhaps 3,000-3,500 which is still streetable). I think my car will weigh in right at 3,000lbs. or so. It's a 90 coupe.

If you do the 460, do it right. Otherwise it's not worth it. Doing it right means getting at least 500hp on the motor if it's a 460 and 600 if you go 514 or similar stroker. This is just my opinion. Too many big-blocks are all bark and no bite. It's not worth the conversion unless the car ends up having some bite in my opinion.

good luck...

Oh yeah...whatever you do...do NOT buy the crate 514 w/ the football rods. It makes 600hp, yes, but the rods are very, very prone to breaking. Someone I know broke a few rods after only 34 passes on the motor.

------------------
Jeff Kane
1990 LX Mustang Coupe


All times are GMT -5. The time now is 11:11 AM.