Need Info on Swaping Information

browniestang · 06-12-2006, 12:35 AM

what kind of intake would i put on a 94 95 mustang 5.0 engine when installing in a 80 mustang , and what would else would i need to put this engine in my car

Coupe50h · 06-13-2006, 06:36 PM

hmm, new to the stang scene?

The 80 model can be upgraded to efi at a cost, but it would be cheaper to just throw an air gap intake with a carb, 600-700 cfm 4 barrell, depending on heads and cam setup.
so choose your intake, weiand, edelbrock, power plus, etc... to use the stock intake upper and lower, you need fuel injectors, which requires a computer and alot of sensors, but it can be done with a donor car, or alot of cash for the aftermarket......good luck

tmoss · 06-14-2006, 07:19 AM

Use a stock 87-93 intake or a Cobra/Explorer for some extra air flow.

06-12-2006, 12:35 AM	#1
browniestang Registered Member Join Date: May 2006 Posts: 2	Need Info on Swaping Information what kind of intake would i put on a 94 95 mustang 5.0 engine when installing in a 80 mustang , and what would else would i need to put this engine in my car

06-13-2006, 06:36 PM	#2
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: Need Info on Swaping Information hmm, new to the stang scene? The 80 model can be upgraded to efi at a cost, but it would be cheaper to just throw an air gap intake with a carb, 600-700 cfm 4 barrell, depending on heads and cam setup. so choose your intake, weiand, edelbrock, power plus, etc... to use the stock intake upper and lower, you need fuel injectors, which requires a computer and alot of sensors, but it can be done with a donor car, or alot of cash for the aftermarket......good luck __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

06-14-2006, 07:19 AM	#3
tmoss Registered Member Join Date: Mar 2003 Location: Saint Louis, MO Posts: 634	Re: Need Info on Swaping Information Use a stock 87-93 intake or a Cobra/Explorer for some extra air flow. __________________ Tom (Torque) Moss 88Gt 5spd Vert, FLowmaster Catbacks, stock cam advanced 4° @ 108.5° ICL, NMRA prepped GT40P heads 1.85/1.55 valves and 1.7 rockers, MAC P headers Jet-Hot coated, 97 Exlporer intake (ported lower), TB and injectors. 277RWHP/330RWTQ (SAE). http://www.fastlanecars.com/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!! Need INFO!	srv1	Blue Oval Lounge	6	09-12-2003 09:20 AM
Nitrous information Website!!!	FordFasteR	Windsor Power	1	02-04-2002 05:00 PM
Information about clevlord	-RootS-	Windsor Power	2	09-17-2001 05:45 AM
rear diff. info. please	rokdog13	Blue Oval Lounge	3	02-07-2001 08:39 PM
information?	XR1stang	Racer's Club House	2	05-11-1999 02:06 PM