Need to know if P245/50/16 tires are too wide for front?
I've heard that the P245/50/16 tires will rub on the front of my stang. Is this true? Is it a bad rub or only if you are cranking the tires all the way? Thanks.
------------------ 88GT 5-speed Bolt ons:Ram Air, K&N, PS91 coil, Accel Cap/Rotor, 190lph Fuel pump, Pro 5.0, March Pullies, DynoMax Cat-back, 16" Ponies, 3.73 gears. "Nip it in the Bud" My Mustang Homepage |
the 88 might i know they don't on my 91'
|
Ditto what [b]spinemup[b] said.
Anyone with an 88 and 245/50/R16's? ------------------ 1991 5.0 LX Coupe -37,800 miles 13.17 @ 106.14 mph w/ 2.138 60' Pro-Charger D-1SC on the way!!! |
I have those tires in my car and yeah they rub alot if I were u you I'll forget about that i Can't make a u-turn cuz it will rub like hell and guess what i dropped my car and i had to change the tires in the front i have a 1990 gt
|
So what will work? Can I even go with the P235/50/16?? I want to get the same size tires all the way around so I can rotate them after I burn the back ones down a little.
|
I have P245/50/R16 all the way around on my car and they rub a little bit, mostly when i turn left. I dont think it really matters but make sure you have them rotated.
|
I have 245 50 16's on my 88 and they rub only a little. The springs are also stock. My buddy tried them on his 88 and they rubbed alot, his car is also lowered 2"
Also the tires are on ponys. ------------------ Clint MacAulay 88GT 347 150 NOS |
I had 245 50 16s on the front and rear of my 93 gt. No rubbing, but I had problems steering in and out of ruts in the road because of the wide front tires. I went down to 225 50 16s on the front, and that improved my steering greatly. Sure, you cant rotate the tires, but its been 2 years, and the tread depth looks about the same for both.
|
i ran 245/45/16 with very minumal rubbing on a 87 lx..IMHO 245/45/16 are the best looking tires for a 16" rim
------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one.. |
All times are GMT -5. The time now is 09:36 PM. |