Need new engine

1stGenRacer · 10-17-2001, 05:17 PM

I have been looking for a place that sells used 5.0 complete engines. Does anyone know if there is any? Thanks

fiveohpatrol · 10-17-2001, 05:38 PM

so your looking for the COMPLETE engine from throttle body down to the oil pan?

if you have one now, i'd strongly suggest getting a long block from DSS, they have good prices and i've heard their quality is very good, this way you can save some money by using your stock intake/TB

you can get a complete crate engine from FRPP as well

------------------
88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft

[This message has been edited by fiveohpatrol (edited 10-17-2001).]

10-17-2001, 05:17 PM	#1
1stGenRacer Registered Member Join Date: Sep 2001 Location: Pottstown,PA,19464 Posts: 4	Need new engine I have been looking for a place that sells used 5.0 complete engines. Does anyone know if there is any? Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Small Ponies	0	05-12-1999 02:27 AM
Very bad experience with Engine Dynamics of San Jose CA	JAGraff	Racer's Club House	0	05-12-1999 02:27 AM

10-17-2001, 05:38 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	so your looking for the COMPLETE engine from throttle body down to the oil pan? if you have one now, i'd strongly suggest getting a long block from DSS, they have good prices and i've heard their quality is very good, this way you can save some money by using your stock intake/TB you can get a complete crate engine from FRPP as well ------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft [This message has been edited by fiveohpatrol (edited 10-17-2001).]