new motor runs goood

faststang90 · 07-04-2001, 04:23 PM

got new motor and i thinks its going to fly i took it down the road and 1st gear it blows the et streets away it spins most of the way in 2nd and about 40 feet in 3rd the timing is not set or the tps so i think its going to move when i get it tuned
by the way new motor is a 306 stg2 canfield heads ultra dyne cam .565 288 holley intanks stg 2 ported 30 pound inj 1 5/8 long tubes and 1.7 crane rockers

jonnyk · 07-05-2001, 12:50 AM

Sounds like a great combo. Good to see you're happy

Get that beast dialed in and go find some LS1's to toy with.

------------------
1991 LX Hatch 5.0L

Rick 91GT · 07-05-2001, 07:35 AM

Sounds like you'll be happy with all that new power. I can't believe you have Stage 2 ported Holley intakes as they flow ungodly numbers already, what do the heads flow? I was talking to Ron at Foxlake about porting mine and he said for the most part they will fully port the lower but leave the upper alone since it flows so big already, those things must move a lot of air for you. Do you know the flow numbers on the intakes also, did they have to cut it in half, port and re-weld it?

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

[This message has been edited by Rick 91GT (edited 07-05-2001).]

faststang90 · 07-05-2001, 10:26 PM

the intanks r not all cut up they just clean them up real good did not get the intanks flowed but the heads flowed little over 300 and 231 it runs great but i think i broke the upper control arm where it bolts on the body

07-04-2001, 04:23 PM	#1
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	new motor runs goood got new motor and i thinks its going to fly i took it down the road and 1st gear it blows the et streets away it spins most of the way in 2nd and about 40 feet in 3rd the timing is not set or the tps so i think its going to move when i get it tuned by the way new motor is a 306 stg2 canfield heads ultra dyne cam .565 288 holley intanks stg 2 ported 30 pound inj 1 5/8 long tubes and 1.7 crane rockers

07-05-2001, 12:50 AM	#2
jonnyk Being stroked is great Join Date: Oct 1998 Location: Alberta, Canada Posts: 772	Sounds like a great combo. Good to see you're happy Get that beast dialed in and go find some LS1's to toy with. ------------------ 1991 LX Hatch 5.0L

07-05-2001, 07:35 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Sounds like you'll be happy with all that new power. I can't believe you have Stage 2 ported Holley intakes as they flow ungodly numbers already, what do the heads flow? I was talking to Ron at Foxlake about porting mine and he said for the most part they will fully port the lower but leave the upper alone since it flows so big already, those things must move a lot of air for you. Do you know the flow numbers on the intakes also, did they have to cut it in half, port and re-weld it? ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP [This message has been edited by Rick 91GT (edited 07-05-2001).]

07-05-2001, 10:26 PM	#4
faststang90 Registered Member Join Date: May 2001 Location: baytown,tx,us Posts: 128	the intanks r not all cut up they just clean them up real good did not get the intanks flowed but the heads flowed little over 300 and 231 it runs great but i think i broke the upper control arm where it bolts on the body