New parts - Who wants to help?

2FastLX · 03-10-2001, 04:13 PM

I'm having a Mustang Modification party. I'll supply the car, tools, and the parts listed below. I'll buy lunch too for anyone wanting to help

I just got my C&L 76mm MAF (NICE), 24lb injectors (used but nice), MAC cold air kit (one rubber fitting seems kinda loose), Walbro 190lph fuel pump (everything actually came with it. Woohoo!), MAC white face gauges (I coulda designed better) and KS Reproduction white face A/C overlay (this is the way I would have designed the MAC) today. I also have a set of underdrive pullies, a GT-40 intake, a set of stock ported heads, Stewart high flow water pump (coming) and 3.73 gears to install at the same time. Who wants to help? Let's see... fiveohpatrol is pretty close to me, and stangsrule has already volunteered. Anyone else?

This should really wake my car up don't ya think? My current mods are MAC long tubes, Pro Chamber crossover, and cat back, K&N filter, MSD Blaster coil, Taylor Spiro Pro wires, Pro 5.0 shifter, and all the free stuff... um that's it as far as performance parts go. I also have Koni Yellows, Ford C's, BBK c/c plates, Cobra R's, and Dunlop SP Sport 8000 tires.

------------------
Indiana Stangers Association
Buy your parts here

Rick 91GT · 03-10-2001, 04:40 PM

[This message has been edited by Rick 91GT (edited 03-10-2001).]

Rick 91GT · 03-10-2001, 04:43 PM

Hey Kevin I'll help but you have to bring your party to Pennsylvania. I have a heated garage..but it looks like a mustang exploded in there with my car apart...performance parts everywhere...

Good Luck on the install, it should make a world of a difference

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

2FastLX · 03-10-2001, 04:51 PM

I'm getting ready to go out there now and start test fitting stuff (just because I am too anxious!). I'm going to start on this damn overheating problem too. I guess I'm just going to rip all the cooling system components out and start from scratch.

I need to order my Accufab TB soon. Well, time's a waistin'

------------------
Indiana Stangers Association
Buy your parts here

03-10-2001, 04:13 PM	#1
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	New parts - Who wants to help? I'm having a Mustang Modification party. I'll supply the car, tools, and the parts listed below. I'll buy lunch too for anyone wanting to help I just got my C&L 76mm MAF (NICE), 24lb injectors (used but nice), MAC cold air kit (one rubber fitting seems kinda loose), Walbro 190lph fuel pump (everything actually came with it. Woohoo!), MAC white face gauges (I coulda designed better) and KS Reproduction white face A/C overlay (this is the way I would have designed the MAC) today. I also have a set of underdrive pullies, a GT-40 intake, a set of stock ported heads, Stewart high flow water pump (coming) and 3.73 gears to install at the same time. Who wants to help? Let's see... fiveohpatrol is pretty close to me, and stangsrule has already volunteered. Anyone else? This should really wake my car up don't ya think? My current mods are MAC long tubes, Pro Chamber crossover, and cat back, K&N filter, MSD Blaster coil, Taylor Spiro Pro wires, Pro 5.0 shifter, and all the free stuff... um that's it as far as performance parts go. I also have Koni Yellows, Ford C's, BBK c/c plates, Cobra R's, and Dunlop SP Sport 8000 tires. ------------------ Indiana Stangers Association Buy your parts here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is your favorite general auto parts store?	Fox Body	Blue Oval Lounge	28	12-07-2017 11:18 AM
Issue with the Parts Girl	302 LX Eric	Blue Oval Lounge	22	06-30-2002 06:58 PM
Trading Notch for parts	Coupe Devil	Blue Oval Lounge	3	04-20-2002 12:58 PM
My Good Experience With Ford Parts On Line - Good Discounts	Maroon 5.0 LX	Blue Oval Lounge	1	10-03-2001 09:46 AM
What would these parts be worth?	2FastLX	Blue Oval Lounge	3	03-13-2001 09:11 AM

03-10-2001, 04:40 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	[This message has been edited by Rick 91GT (edited 03-10-2001).]

03-10-2001, 04:43 PM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Hey Kevin I'll help but you have to bring your party to *Pennsylvania.* I have a heated garage..but it looks like a mustang exploded in there with my car apart...performance parts everywhere... Good Luck on the install, it should make a world of a difference ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

03-10-2001, 04:51 PM	#4
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	I'm getting ready to go out there now and start test fitting stuff (just because I am too anxious!). I'm going to start on this damn overheating problem too. I guess I'm just going to rip all the cooling system components out and start from scratch. I need to order my Accufab TB soon. Well, time's a waistin' ------------------ Indiana Stangers Association Buy your parts here