MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Nitrous AOD how to...... (http://forums.mustangworks.com/showthread.php?t=23096)

gtsr515 05-01-2002 05:48 PM

Nitrous AOD how to......
 
Hey guy's, I am running good naturally aspirated with my new AOD, my knowledge is with T-5's, my question is, what do i need to do to my AOD to run 11's with Nitrous and what gears are best, we are looking at a daily driver, not afraid of tall gears, I also must state i want slicks so i assume somewhat of a nasty trans. Let me have it with both barrells!!!!!!:)

FivepointOH 05-01-2002 11:30 PM

what do you run n/a and what mods do you have/plan to do besides the n20?

Mach 1 05-01-2002 11:37 PM

Gear ratio depends on your tire size and your trap speed RPM. On the bottle, with a 26" tire, I would say eithier 3.73 or 4.10.

The AODs biggest weak point is the input shaft, which has been known to break on stock engines.

Get a one piece input shaft, non-lockup PI stallion converter (2800 RPM stall), make sure the tranny is in good shape, if not rebuild it with blue plate clutches, and do a shift kit or valve body modificatons. You can eliminate the 1-D-1 shuffle to hold second gear with a Lentech valve body or others (GER does it also), or you could get a Baumann shift kit that holds the shift points higher and just leave it in drive. I think you can take them up to around 5400 RPM with the baumann, which isnt bad, depending o your engine combo and what RPM you want to shift at.


All times are GMT -5. The time now is 04:18 AM.