no low end power
help,i have an 85 roller motor in my 80 mustang and it just seems like no power till 3500 rpm.It has the stock type carb,trick flow heads (202 valves) crower cam .218/.224 lift is .467/.485 with 1.72 crane rockers,torker 2 man. msd dist. mac long tubes & h pipe, aod tranny w/2000 stall,373 rear end,18 deg.init. and 35 total adv.Tried adv.everywhere from 10 to 20 init.not much help. cam is deg. at 2 deg. adv. any ideas ?
|