![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Apr 2003
Posts: 69
|
![]() Once and for all I got rid of my "March" underdrive pullies on my '89 Mustang LX! They're cool and add a little power but I got real tired of having to avoid stop and go traffic or letting the car idle for a few minutes.
The first thing I noticed is the A/C will now blow 38 degrees at the vents at idle on a 90 degree day. With the underdrives, it would cool to 38 while driving, but as soon as I came to a stop light, the vent temp would start to creep up to 50 degrees or higher! Second, the temperature gauge runs a little cooler at idle. With the underdrives, (again at idle) the gauge would always creep up a little bit. Last, (and I don't know why) the idle smoothed out! Maybe I wasn't getting the proper voltage for the computer.... With the underdrives, if I used the blower Fan at idle the meter would read discharge until I started moving again. Now I't always charging even with the fan on high and the headlights on! IMO, underdrive pullies or good for strip cars but not street driven cars. Glad I finally dumped 'em! Phil |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: Mar 1999
Location: Jackson, LA
Posts: 264
|
![]() phil,
i know underdrives can be a pain, but look at the big picture, you are right with a stock set up, they suck for a everyday driver. but with a few modifications, they can be great. to be able to keep my pulleys i added the following things 1. A 130 amp altenator, because the stock altenator sucked anyway and i wanted to add a electric fan, and there was no way with a stock altenator (130.00 from oreilly's) 2. A black magic electric fan, because my car only overheated at a stop so with an electric fan, it is putting out alot more air than a stock fan at idle with pulleys. so that cured that cured the overheating at idle. so to sum it up, with adding an electric fan ($200) and a sn-95 alternator, i picked up nearly 15-20 hp at the rear wheels and get better mileage. some people are lucky to get that to the rear wheels after head work. so pulleys can be bad, or not to bad if a few modifications are made. good luck brian
__________________
GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!! |
![]() |
![]() |
![]() |
#3 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#4 |
Registered Member
Join Date: Mar 1999
Location: Jackson, LA
Posts: 264
|
![]() i meant to say 15-20, with the underdrives and fan.
__________________
GT-40X heads(58cc), Cobra upper and lower, 75 mm Bullet, Moroso fenderwell induction, FRPP 65mm TB, 24# injectors, black magic electric fan, phenolic spacer, 1.7 crane cobra roller rockers, crane 2031, BBK 1 5/8 equal length hearders, 2.5 inch off road pipe, 2.5 flowmaster catback, FMS 3.55 gears, T5-Z transmission, FRPP aluminum driveshaft, svo heavy duty clutch, mcleod bullet proff bellhousing, BBK adjustable cluth quadrant, hurst billet shifter, lakewood subframes, BBK strut tower brace, BBK 2pt lower cross bar, FMS 190 lph fuel pump, crane ps91 coil, FMS street pulleys, and 300+ race wires. All thanks goes to my wife sheri, jason, jeff, robby, my dad and all others you helped contribute. most importantly GOD!!! |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Jul 2000
Location: Norman, Oklahoma, USA
Posts: 597
|
![]() Underdrives and an electric fan can add quite a bit, especially on the top end. On www.fordmuscle.com they show E/Ts where they run with stock configuration, then underdrives, short belts, no belt. It's pretty amazing the differences they got between the setups. On my 84 I'm going to run a 3 inch, yes 3 inch, crank pulley and the water pump pulley that comes with it, and a stock alternator pulley, electric fan, and no power steering, a/c, or smog pump. I just hope with my single core radiator that I don't overheat. Hopefully the fan and a lower temp thermostat will help with that....
Plus, I plan on getting one of those finned aluminum oil filter covers, that will add like 40 horsepower don't you think? Plus, my valve covers are finned aluminum so that should help cool it down like 50 degrees or so. Hehehehe.
__________________
Michael Black QuantumMotorsports Norman, OK 1984 LX Hatch 306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat. Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAI/ K&N Filters/ Underdrives | Comatose | Windsor Power | 8 | 06-25-2002 01:19 PM |
Motorsport Underdrives | bigwhitecobra | Blue Oval Lounge | 4 | 12-23-2001 11:46 AM |
Belt Fits without A/C Smog pump and underdrives | sedanman | Windsor Power | 2 | 04-03-2001 03:52 PM |
Cobra Underdrives | King Snake | Modular Madness | 6 | 06-09-2000 10:00 AM |