NON POWER TO POWER

swtstang · 08-25-2001, 01:43 PM

I'VE GOT MANUEL EVERYTHING AND WANT POWER DOOR LOCKS AND WINDOWS.... HAS ANY ONE ELSE COVERTED OVER IF SO I NEED HELP....THANKS

84_GT350 · 08-25-2001, 10:35 PM

There are some companies that make kits specificly for the job of converting to power windows. Either that or you could just yank the parts off of a junkyard Stang.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

So I pushed it up to 110,
That flathead motor was about to give in,
I crossed my fingers and prayed to the lord,
Don't let me down you fuct up ford!"

"5-Oh Ford" by The Reverend Horton Heat

swtstang · 08-25-2001, 11:54 PM

Are the wires already gonna be there? I only have power mirrors...... What companies make a kit to do this.....??? thankssss

swtstang · 08-26-2001, 10:24 PM

Ok, I power Window Motors and arms and the switches along with the arm pad..... Now I need to get the door lock actuator....anyone know where I can get a couple? Also I am getting these seats and they are power with heated seats....is there any way to make them work? Now how do I go about wiring this, the seats and the windows and the door locks?? THanks......

08-25-2001, 01:43 PM	#1
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	NON POWER TO POWER I'VE GOT MANUEL EVERYTHING AND WANT POWER DOOR LOCKS AND WINDOWS.... HAS ANY ONE ELSE COVERTED OVER IF SO I NEED HELP....THANKS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
loss of power suddenly	jimdrechsler	Windsor Power	17	09-30-2004 08:49 PM
power for 500 hp daily	Torinalth	Power Adders	22	09-25-2003 11:54 PM
Power for the Power Amp	traderguy	Audio, Security, & Electronics	2	07-13-2003 08:07 PM
power shift?	JamGtStang	Windsor Power	6	03-01-2001 02:11 PM
Electrical power, where to splice?	Chris_H	Windsor Power	3	02-11-2001 08:29 PM

08-25-2001, 10:35 PM	#2
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	There are some companies that make kits specificly for the job of converting to power windows. Either that or you could just yank the parts off of a junkyard Stang. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s So I pushed it up to 110, That flathead motor was about to give in, I crossed my fingers and prayed to the lord, Don't let me down you fuct up ford!" "5-Oh Ford" by The Reverend Horton Heat

08-25-2001, 11:54 PM	#3
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	Are the wires already gonna be there? I only have power mirrors...... What companies make a kit to do this.....??? thankssss

08-26-2001, 10:24 PM	#4
swtstang Registered Member Join Date: Apr 2001 Location: stockton, ca usa Posts: 160	Ok, I power Window Motors and arms and the switches along with the arm pad..... Now I need to get the door lock actuator....anyone know where I can get a couple? Also I am getting these seats and they are power with heated seats....is there any way to make them work? Now how do I go about wiring this, the seats and the windows and the door locks?? THanks......