Water In The Oil

mortsmustang · 06-05-2001, 08:29 PM

OK, I have put a PD 9LB blower on my 89 5.0 along with a X-Cam. I have replaced the lower intake gasket 3 times Water Pump Gasket, Head Gaskets and have even gone as far as to try a different set of head (factory) and still cannot get the water to stop any one have any ideas. It seems to be fine but as soon as it heats up the normal temp is starts to blow in.

JRowlette · 06-05-2001, 09:41 PM

Have you checked to see if your EGR spacer is leaking? I just know that coolant runs through the spacer. Just my $.02

06-05-2001, 08:29 PM	#1
mortsmustang Registered Member Join Date: Mar 2001 Location: Coos Bay, Oregon Posts: 3	Water In The Oil OK, I have put a PD 9LB blower on my 89 5.0 along with a X-Cam. I have replaced the lower intake gasket 3 times Water Pump Gasket, Head Gaskets and have even gone as far as to try a different set of head (factory) and still cannot get the water to stop any one have any ideas. It seems to be fine but as soon as it heats up the normal temp is starts to blow in.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible oil in water??	Simi Stang	Windsor Power	1	01-24-2003 02:55 PM
Free Horsepower, but at what cost??	71grande	Classic Mustangs	13	09-21-2002 05:07 PM
LOTS of water in exhaust	Stang_Crazy	Windsor Power	1	04-06-2002 02:55 PM
Water pump....AC Bracket problem	Jimmy Page	Classic Mustangs	3	07-28-2001 01:54 PM
Pulleys, water pump, and fan clutch	dinomite	Windsor Power	5	05-26-2001 09:00 AM

06-05-2001, 09:41 PM	#2
JRowlette Registered Member Join Date: Apr 2001 Location: Bowling Green, KY Posts: 95	Have you checked to see if your EGR spacer is leaking? I just know that coolant runs through the spacer. Just my $.02