Omega roller rockers

12-28-2000, 04:06 PM

Anyone had any problems with these rockers whatsoever?? I had someone tell me that they were cheap, not price wise... quality wise.

------------------
Rick
My 89lx(updated 11/5/2000)
My 97 Cobra

12-31-2000, 11:32 AM

Anyone??

8850 · 01-01-2001, 04:26 AM

I have had good luck with my stud mount Omega's.

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph

[This message has been edited by 8850 (edited 01-01-2001).]

n20neenee · 01-01-2001, 01:19 PM

my omegas worked great, if anythig they are alittle loud

12-28-2000, 04:06 PM	#1 (permalink)
rbatson Posts: n/a	Omega roller rockers Anyone had any problems with these rockers whatsoever?? I had someone tell me that they were cheap, not price wise... quality wise. ------------------ Rick My 89lx(updated 11/5/2000) My 97 Cobra

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roller rockers for stock heads	QuantumMotorsports	Windsor Power	1	07-14-2003 03:15 PM
Roller Rockers, bad?	HiFlow5 0	Windsor Power	1	04-14-2002 01:35 PM
roller rockers	bobtodd	Windsor Power	4	04-07-2002 01:34 PM
reg rockers or roller rockers??	Chevysucks	Windsor Power	1	12-05-2001 07:17 PM
Valve Springs & Roller Rockers	StreetStang37	Windsor Power	4	04-17-2001 03:54 AM

12-31-2000, 11:32 AM	#2 (permalink)
rbatson Posts: n/a	Anyone??

01-01-2001, 04:26 AM	#3 (permalink)
8850 Registered Member Join Date: Nov 1998 Location: Sugarland, TX USA Posts: 161	I have had good luck with my stud mount Omega's. ------------------ 88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph [This message has been edited by 8850 (edited 01-01-2001).]

01-01-2001, 01:19 PM	#4 (permalink)
n20neenee Registered Member Join Date: Oct 2000 Location: san angelo tx Posts: 32	my omegas worked great, if anythig they are alittle loud

Sponsored Links