![]() |
Only 8 days left e check Help needed o2
Live in Ohio bought an 1989 lx convertible wont pass e check too lean, replaced solenoid to egr got rid of one code, code 91 pulled left 02 sensor cleaned and got rid of code. Code 41 this sensor has been broken off and the plug it plugs into going to the motor. Does anybody have a diagram to where these wires run, do they run to the solenoid, do they run to the computer ? After the 27th cant drive it till repaired. Help guys
|
you'll have to get more specific on the cable, ( which sensor, colors etc )
|
right side o2 sensor, three wires, they are not there at all the plug the sensor plugs into is not there.
|
Sounds to me like you need a new o2 harness if the plug is not there. Or do you mean the plug for the sensor is not there. If that is the case you need a new o2 sensor.
|
if the plug " for the sensor " on the main harness is missing then your in trouble and need to replace the harness,.. if the plug is off the sensor then just get new sensors..
|
can you buy just an o2 harness or will I need complete wiring harness for the motor ?
|
you can buy just an o2 harness you can probably find one on ebay pretty cheap. I used to have an extra. I might still have it. I'll have to move some things in the garage and get back to you on that.
|
been looking on ebay, I need the harness from the computer to the o2 sensor, if you got one just give me a price
|
The plug for the o2 HARNESS should be somewhere near your mas meter. that is where it ties in and goes to your computer. I will look in the morning. If I do have one I would probably sell it for $10 shipping included just to help you out.
|
Been trying to get back on here, i'll paypal you the money if you find one for me. Thanks for helping
|
All times are GMT -5. The time now is 08:49 PM. |