MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Opinion's on next mod??? (http://forums.mustangworks.com/showthread.php?t=467)

MustangLX90 01-22-2001 11:29 AM

Opinion's on next mod???
 
This is what i have so far: 3.73's, dynomax super turbos, straight h-pipe, FRPP 190lph fuel pump, FRPP tune up kit, superchip, 14 degrees timing, k&n panel filter. Whats next?

fiveohpatrol 01-22-2001 01:49 PM

a trashcan to throw that chip into, unless your car is highly modified and you have a custom burned chip, they don't do didily, i actually read an article where they tested hypertech and superchips on a few different vehicles and one gained 0.2hp and a few lost 1-2 full hp, to summarize-ditch the chip, as for your question, i'd get a set of underdrive puleys next, its a noticable feel for a small abount of money, then maybe subframe connectors and rear control arms, roller rockers are a good idea too

------------------
88 Notchback 5.0, 3.73's, pulleys, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after 1.7RR install
http://smilecwm.tripod.com/net4/ketten.gif
http://www.mustangworks.com/mustangs...g739-slot3.jpg

gofastlx 01-22-2001 02:08 PM

Quote:

Originally posted by fiveohpatrol:
a trashcan to throw that chip into, unless your car is highly modified and you have a custom burned
Whew...I second that..custom is the only way to go.

Quote:

Originally posted by fiveohpatrol:
roller rockers are a good idea too
I've got a set of Omega roller 1.72's for sale...adds .33 lift to to your cam, gives a bit more power.

Rob


NOS_Notch 01-22-2001 08:57 PM

5-speed car?????????????
Tires....
Long tubes or equal length shorties....
Nitrous...actually my first choice, but people are still afraid of the boogie man, so i made it last.


------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com

MustangLX90 01-23-2001 12:11 PM

Yep its a 5 spd and i has P245/50/R16 on ponys


All times are GMT -5. The time now is 07:12 AM.