MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   parking brake question (http://forums.mustangworks.com/showthread.php?t=20552)

82 GT 03-11-2002 06:06 PM
parking brake question
 
I installed new parking brake cables on my '82GT and the cables won't quite reach the cable connector from the brake handle.
If I loosen the adjustment nut on the brake handle, will that give me some slack to reach the cable ends?

7DMACH1 03-11-2002 06:31 PM
It should. RAY

82 GT 03-11-2002 07:28 PM
I adjusted the nut out as far as I could and it's still about an inch and a half short. I noticed the ends of the cables are not even either(1 inch difference). Now what??

DZEE'S LX 03-12-2002 12:33 AM
Not sure if your ebrake is like my 91 but if it is you can rotate the pulley (where the cable connects) and pin it while you hook up the other end of the cables underneath. I think this was covered in my manual too. If you don't have a manual let me know and I'll look for it tomarrow.

Dan


All times are GMT -5. The time now is 03:10 PM.