PCV Valve ?

Cody2552 · 01-14-2003, 08:38 PM

Is it necessary for the PCV Valve from the lower to the upper intake manifold? And could i plug the pressure tube on the throttle body and valve cover tube? i think that is what it is called? please help

PKRWUD · 01-14-2003, 10:31 PM

The PCV system is very important, why do you want to get rid of it? What mods have already been done?

Cody2552 · 01-15-2003, 12:13 AM

intake, heads, cam, rockers, clutch, gears, bored, tranny, crank, rods, springs, etc.

PKRWUD · 01-15-2003, 02:10 AM

Well, you have five choices.

1) Leave it alone (I like this one)
2) Install a blow-by evac set-up (involves welding a tip into your headers, 2 one-way check valves, and hoses from the collectors to the valvecovers)
3) Install breathers on your valve covers (if you have any compression, juice or boost, expect oil all over your engine)
4) Install a valve cover with elevated breathers (works)
5) Blow out your seals and gaskets

Take your pick.

Take care,
~Chris

95mustanggt · 01-15-2003, 06:50 AM

Quote:

Originally posted by PKRWUD
Well, you have five choices.

1) Leave it alone (I like this one)
2) Install a blow-by evac set-up (involves welding a tip into your headers, 2 one-way check valves, and hoses from the collectors to the valvecovers)
3) Install breathers on your valve covers (if you have any compression, juice or boost, expect oil all over your engine)
4) Install a valve cover with elevated breathers (works)
5) Blow out your seals and gaskets

Take your pick.

Take care,
~Chris

That's what I like about you Chris, you always lay ALL the options out.

LOL

01-14-2003, 08:38 PM	#1
Cody2552 Registered Member Join Date: Nov 2002 Posts: 68	PCV Valve ? Is it necessary for the PCV Valve from the lower to the upper intake manifold? And could i plug the pressure tube on the throttle body and valve cover tube? i think that is what it is called? please help

01-14-2003, 10:31 PM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	The PCV system is very important, why do you want to get rid of it? What mods have already been done? __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

01-15-2003, 02:10 AM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Well, you have five choices. 1) Leave it alone (I like this one) 2) Install a blow-by evac set-up (involves welding a tip into your headers, 2 one-way check valves, and hoses from the collectors to the valvecovers) 3) Install breathers on your valve covers (if you have any compression, juice or boost, expect oil all over your engine) 4) Install a valve cover with elevated breathers (works) 5) Blow out your seals and gaskets Take your pick. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Air by pass valve question.	Jaegermeister2k	Power Adders	21	05-06-2005 09:40 PM
Valve tap!!	SmokinStangGT	Windsor Power	1	07-31-2003 03:42 AM
valve problem	pearlgt40 306	Windsor Power	3	07-05-2003 01:21 AM
Proportioning Valve	MidniteWrider	Classic Mustangs	1	07-11-2001 09:14 AM
PCV Valve what the ?@#$@#$@$	Chevyguy	Windsor Power	3	04-11-2001 08:01 PM

01-15-2003, 12:13 AM	#3
Cody2552 Registered Member Join Date: Nov 2002 Posts: 68	intake, heads, cam, rockers, clutch, gears, bored, tranny, crank, rods, springs, etc.