MustangWorks.com : Ford Forums - View Single Post

PKRWUD · 09-23-2001, 05:46 AM

Your new engine has 13:1 compression Speed-Pro Forged Aluminum Pistons.

When installed in a 302, the numbers are as follows:
Compress height: 1.600"
Dome height: .440"
Cyl. Head Vol: 53.5cc
Eff. Dome Vol: 10.4cc
Deck Clearance: .010"
Compress Gasket Thickness: .028"
Piston weight (w/o pin): 618 grams
Piston Pin Lock Ring: LR-194
Compression ratio @ .030" over: 13.00:1

Have fun buying gas!

Take care
~Chris

------------------
Retired Moderator
MustangNet

My site: JimPorterRacing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

09-23-2001, 05:46 AM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Your new engine has 13:1 compression Speed-Pro Forged Aluminum Pistons. When installed in a 302, the numbers are as follows: Compress height: 1.600" Dome height: .440" Cyl. Head Vol: 53.5cc Eff. Dome Vol: 10.4cc Deck Clearance: .010" Compress Gasket Thickness: .028" Piston weight (w/o pin): 618 grams Piston Pin Lock Ring: LR-194 Compression ratio @ .030" over: 13.00:1 Have fun buying gas! Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!