ET conversion (1/8-1/4mi.)

ultraflo · 09-01-2002, 11:49 PM

I went to an 1/8 mile track in Havana, IL tonight... got four runs in for the evening with two back-to-back 6.571's and the mph for each run, in order, was 112.24 and 114.18 (1.413 and 1.477 60ft.)... which leads me to my question... I entered the 114 run in the Analyzer 1/8 ET conversion section and came up with 10.25 @ 143.xx

I realize that the Analyzer is an approximation, but could it be 10mph off? My previous best 1/8mi pass was a 6.598 @ 104.something at Cordova, IL a few weeks ago... and that was my 10.322 @ 131.39 pass.

I'm having trouble accepting the mph that I was doing at Havana 1/8mile track, but I'm going to Gateway on Wed. 9-4-02 to see what I come up with for numbers at that particular track. I went there 8-28 but suffered clutch problems and never made a good/full pass... got that problem solved and I'm ready to put down some 10's at Gateway.

Any thoughts/ideas?

ultraflo · 09-02-2002, 12:27 PM

...the clocks must be off by exactly 10 mph. I'll know after I go to Gateway's Wed. T/T Sept. 4

ultraflo · 09-02-2002, 07:15 PM

squint really hard and you might be able to read it

fiveohpatrol · 09-03-2002, 01:17 AM

sorry i cant help with your question, i just wish i could hit that 114mph in the 1/4mile

maybe i will when i finally get to the track with the nitrous

09-01-2002, 11:49 PM	#1
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	ET conversion (1/8-1/4mi.) I went to an 1/8 mile track in Havana, IL tonight... got four runs in for the evening with two back-to-back 6.571's and the mph for each run, in order, was 112.24 and 114.18 (1.413 and 1.477 60ft.)... which leads me to my question... I entered the 114 run in the Analyzer 1/8 ET conversion section and came up with 10.25 @ 143.xx I realize that the Analyzer is an approximation, but could it be 10mph off? My previous best 1/8mi pass was a 6.598 @ 104.something at Cordova, IL a few weeks ago... and that was my 10.322 @ 131.39 pass. I'm having trouble accepting the mph that I was doing at Havana 1/8mile track, but I'm going to Gateway on Wed. 9-4-02 to see what I come up with for numbers at that particular track. I went there 8-28 but suffered clutch problems and never made a good/full pass... got that problem solved and I'm ready to put down some 10's at Gateway. Any thoughts/ideas? __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

09-02-2002, 12:27 PM	#2
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	...the clocks must be off by exactly 10 mph. I'll know after I go to Gateway's Wed. T/T Sept. 4 __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

09-02-2002, 07:15 PM	#3
ultraflo NX dealer-man Join Date: Sep 1998 Location: Peoria, Illinois Posts: 977	squint really hard and you might be able to read it __________________ RLS Racing! 93 LX 9.20 @ 147mph 03 Mach 1 12.39 @ 116mph

09-03-2002, 01:17 AM	#4
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	sorry i cant help with your question, i just wish i could hit that 114mph in the 1/4mile maybe i will when i finally get to the track with the nitrous __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What all do you need to do rear disc conversion w/ SN95 Parts	KG88GT	Windsor Power	1	07-29-2003 01:45 PM
questions about maf conversion	spankaveli	Windsor Power	10	10-19-2002 02:46 PM
5 to 4 lug conversion	mike_navigator	Blue Oval Lounge	7	08-14-2002 11:17 PM
Spindles for Brake Conversion	Vishnoff	Classic Mustangs	2	08-06-2002 04:12 PM
mass air 87GT conversion	greydan	Windsor Power	3	01-02-2002 07:57 PM