Please help with cam selection

NitroNixon · 03-07-2006, 12:02 PM

Will a B-303 cam work with my new combo?

650 DP
Crosswind Intake - (Edel RPM Air Gap Clone)
Edelbrock Performer Heads with mild port work
Fresh 306 bottom-end
Underdrive Pullies
Centerforce Clutch
T5
373 gears
MSD (Dist., Ignition, and coil)
Maybe 75shot nitrious

Any help would be appreciated.

Coupe50h · 03-07-2006, 07:33 PM

In my experience with carbureted stangs, the b303 works awesome, my brother and law ran it in a carb'd 347, and It would trap 113 with aluminum heads, and it sounds rowdy too.
hope that might help.

03-07-2006, 12:02 PM	#1
NitroNixon Registered Member Join Date: Mar 2002 Location: DC Posts: 129	Please help with cam selection Will a B-303 cam work with my new combo? 650 DP Crosswind Intake - (Edel RPM Air Gap Clone) Edelbrock Performer Heads with mild port work Fresh 306 bottom-end Underdrive Pullies Centerforce Clutch T5 373 gears MSD (Dist., Ignition, and coil) Maybe 75shot nitrious Any help would be appreciated. __________________ 87 GT As of 2/1/06 650 DP Carb Crosswind Intake Edelbrock Performer Heads 97 Explorer Bottomend w/ B-303 Cam 1.7 Roller Rockers Flowtech Longtube Headers Flowtech H-Pipe MSD Black Wires MSD ignition MSD Distributor Blaster 3 Coil Electric Fan Underdrive Pullies T5 Trans Hurst Shifter Lowered 1.5" 373 Gears

03-07-2006, 07:33 PM	#2
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	Re: Please help with cam selection In my experience with carbureted stangs, the b303 works awesome, my brother and law ran it in a carb'd 347, and It would trap 113 with aluminum heads, and it sounds rowdy too. hope that might help. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cam selection	avbcon12	Windsor Power	42	10-10-2002 08:22 AM
Intake selection with a 383/408 stroker	Capri306	Windsor Power	12	05-03-2002 10:12 PM
Gear Ratio Selection	Green96GT	Modular Madness	4	07-19-2001 11:40 AM
Speaker locations and Amp selection	Timanator	Audio, Security, & Electronics	0	07-07-2001 08:46 PM
Gear selection	Grulla	Corner Carvers Delight	1	03-13-2000 09:04 AM