Please help with EGO codes
Well, my car is still getting the following codes. These are both KOEO:
41 - EGO sensor signal out of range
(EX. 5.0L SEFI); Fuel pressure
out of range-5.0 SEFI / Always
lean
91 - EGO sensor problem due to fuel
pressure of injectors out of
balance / transaxle fault
(shift solenoid 1)
Now these codes bring up a few questions.
1) What is a transaxle fault?
2) What is a shift solenoid 1?
3) Does this mean it is an
injector problem or O2 sensor?
I tapped into the EGO wires at the computer and got readings of .3v under partial load and it only went up to .6v @ WOT.
I am installing a Procharger in a few weeks and don't want to run lean under any kind of boost, so I would like to get this resolved before then. Does anyone have any ideas? Should I change O2's again?
Thanks for any help. As always, it is greatly appreciated.
------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot
|