please help me fix my car :(

spankaveli · 10-18-2002, 10:55 PM

here's the deal. my cars running out of steam at approximately 4,000 rpm. seems to do it worse w/ the cold weather, although i'm not completely sure of that. it pulls damn hard to 4k where it will just lose power. thats at WOT. if i go half throttle it will go all the way to redline. if i unplug the MAF sensor the car will mess up midrange but at WOT high rpm the car will pull pretty hard.

mods in sig

what has been replaced: coil, rotor, cap, distributor, tfi module, plugs (.035 gap), wires, fuel pump, ect sensor, map sensor, maf sensor (stock one in there now), and i've rewired the maf conversion. map sensor doesn't have the vacuum hose on it and the hose it was T'd onto is plugged at the T.

can anyone help me

ive relaced enough stuff to feed a small junk yard.

edit: i have a lifter on the driver side that taps occasionlly, its only done it 3 times within about 2 months. could that be the problem? someone suggested it might but that leaves the questio nas to why it pulls hard with the maf plugged in. ...

edit2: timing is set at 14 w/ the spout out and fuel pressure is at 40 w/ vacuum off right now although changing fuel pressure hasn't seemed to help with the problem. it did the other day (i increased it from 38 to 42) and it seemed to have fixed it but the problem was back the next morning and been doing it since.

10-18-2002, 10:55 PM	#1
spankaveli Registered Member Join Date: Aug 2002 Location: Gonzales, Louisiana Posts: 153	please help me fix my car :( here's the deal. my cars running out of steam at approximately 4,000 rpm. seems to do it worse w/ the cold weather, although i'm not completely sure of that. it pulls damn hard to 4k where it will just lose power. thats at WOT. if i go half throttle it will go all the way to redline. if i unplug the MAF sensor the car will mess up midrange but at WOT high rpm the car will pull pretty hard. mods in sig what has been replaced: coil, rotor, cap, distributor, tfi module, plugs (.035 gap), wires, fuel pump, ect sensor, map sensor, maf sensor (stock one in there now), and i've rewired the maf conversion. map sensor doesn't have the vacuum hose on it and the hose it was T'd onto is plugged at the T. can anyone help me ive relaced enough stuff to feed a small junk yard. edit: i have a lifter on the driver side that taps occasionlly, its only done it 3 times within about 2 months. could that be the problem? someone suggested it might but that leaves the questio nas to why it pulls hard with the maf plugged in. ... edit2: timing is set at 14 w/ the spout out and fuel pressure is at 40 w/ vacuum off right now although changing fuel pressure hasn't seemed to help with the problem. it did the other day (i increased it from 38 to 42) and it seemed to have fixed it but the problem was back the next morning and been doing it since. __________________ Old car - 87 LX Pics New car - 02 WRX Pics & Mods