MustangWorks.com : Ford Forums - View Single Post

88workcar · 05-19-2005, 10:10 PM

I know that what you do to them right now will not Gain the results that I will tell right now. Do yall remeber when MM&FF did the test on POWER HEADS. JUST a head change was good for 42 HP if I remeber correct, JUST THE HEADS. Throw in a cobra and an E or B cam and an easy 50 to 70hp gain for the whole project( on the high side) But the thrill of doing it yourself is priceless

05-19-2005, 10:10 PM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Porting stock heads I know that what you do to them right now will not Gain the results that I will tell right now. Do yall remeber when MM&FF did the test on POWER HEADS. JUST a head change was good for 42 HP if I remeber correct, JUST THE HEADS. Throw in a cobra and an E or B cam and an easy 50 to 70hp gain for the whole project( on the high side) But the thrill of doing it yourself is priceless __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.