MustangWorks.com : Ford Forums - View Single Post

nickj8685 · 08-15-2002, 10:34 AM

I used a 1/2" drill with a carbide bur to do most of the work then I finished it up with a dremel tool and several sanding rolls.

08-15-2002, 10:34 AM	#14
nickj8685 Registered Member Join Date: Jul 2002 Location: Russellville MO, where men are men and sheep are scared Posts: 66	I used a 1/2" drill with a carbide bur to do most of the work then I finished it up with a dremel tool and several sanding rolls.